MX3905.O/M.QXD 2/20/03 7:06 AM Page 13
OPERATING INSTRUCTIONS (CONTINUED)
REPEAT PLAYBACK
1 | 2 |
| |
3 | 4 | ||
| |||
| 1 |
|
2 | 2 |
1 |
3 | 1 |
| |
| 2 |
To repeat a single track, while in the Stop mode, press the REPEAT/MEMORY UP button ❶ once; “REPEAT” will blink in the display. Press the CD Skip/Search 
❷ or 
button ❸ to select the specific track that you wish to repeat. When the desired track number appears in the display,
press the PLAY/PAUSE ( 
) button ❹ to begin playback. The
specific track you selected will be repeated continuously.
To repeat all of the tracks on a disc continuously, while in the Stop mode, press the REPEAT/MEMORY UP button ❶ twice; “REPEAT” will light in the display. Press the CD PLAY/PAUSE ( 
) button ❷ to begin all tracks repeat.
To cancel Repeat Playback, press the REPEAT/MEMORY UP button ❶ until “REPEAT” dis- appears from the display. You can also cancel Repeat Playback
by pressing the CD OPEN/CLOSE button ❷.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1 |
2 |
3 |
Press the CD Function button to select CD.
Insert a CD with the label side facing up.
Wait for the CD player to read the table of contents and display the total number of tracks and playing time of the disc.
Press the MEMORY/CLOCK SET button;
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
13