Pump Shut-Down/Clean-up, Power Cord Wet Hands

operation

4.NEVER! grab or touch a live power cord (Figure 4) with wet hands, the possibility exists of electrical shock, electrocution and even death.

Figure 4. Power Cord (Wet Hands)

DANGER

NEVER grab or touch a live power cord. DO NOT stand in water when connecting the pump's power cord into a voltage source.The possibility exist of electrical shock, electrocution and possibly death!

5.If all of the pump's electrical requirements have been met, insert the power plug (Figure 5) on the pump into the power source receptace. Make sure the extension cord is of proper size, see Table 3. It is recommended that the pump's power cord be plugged into a GFCI receptacle to prevent the possibility of electrical shock.

GFCI

RECEPTACLE

3-PRONG

PLUG

3 3

Figure 5. Connecting the Power

6.Wait a few seconds and water should begin to flow from the discharge hose.

7.If water is not flowing from the discharge hose or not flowing freely after a few minutes, remove the power from the pump and check the system for leaks.

Pump Shut-Down/Clean-up

1.Remove the power from the pump by turning off the circuit breaker or switch that provides power to the pump. Remember to make sure that hands are dry (not wet), and feet are not standing in water when removing or disconnecting power from the pump.

2.Using the lifting rope, lift the pump up from its current position. Remove the discharge hose from the discharge port on the pump.

3.If the pump was used to pump mud, grit or silt, flush vigorously with clean water.

4.Remove the pump from the water. Wipe off any mud or debris that might have attached itself to the pump.

5.Store pump in a clean dry place away from dirt and debris.

WARNING

NEVER cut or remove the ground prong from the pump's AC power cord.

WARNING

This pump is supplied with a grounding conductor and a grounding-type attachement plug.To reduce the possibility of electric shock, make certain that pump is connected only to a properly grounded receptacle.

page 12 — SS233 Submersible Pump • operation and parts manual — rev. #2 (03/22/10)

SS233 specifications

The Multiquip SS233 is a robust and versatile concrete saw designed for effective and efficient cutting of concrete and other construction materials. With its powerful features and advanced technologies, the SS233 is ideal for contractors who require reliable performance in demanding job sites.

One of the standout characteristics of the Multiquip SS233 is its powerful engine. It is equipped with a reliable Honda GX390 engine, delivering exceptional power and torque that allows the saw to tackle tough cutting jobs with ease. This engine not only provides high performance but also ensures fuel efficiency, making it a cost-effective choice for contractors.

The SS233 features a 14-inch blade guard that accommodates a variety of diamond blades, enabling users to perform both wet and dry cuts. The capability to switch between different blade types enhances the versatility of the saw, allowing it to be used for a wide range of applications, including asphalt, concrete, and masonry cutting. With a cutting depth of up to 5 inches, the SS233 can handle various thicknesses, making it suitable for different construction tasks.

Another notable feature is the innovative dust-control system integrated into the design of the Multiquip SS233. This system minimizes dust generation during operation, contributing to a cleaner work environment and promoting the health and safety of operators. The water feed system helps to keep the blade cool and reduces wear, extending the life of both the blade and the saw.

The user-friendly design of the SS233 is evident in its adjustable handle, which enhances comfort and control during operation. This feature allows operators to customize the height of the handle to their preference, reducing fatigue during prolonged use. Additionally, the saw's wheels are designed for easy maneuverability, allowing users to transport the machine effortlessly across job sites.

Multiquip has prioritized durability in the construction of the SS233. The robust frame and high-quality components are designed to withstand the rigors of daily use in demanding environments. This emphasis on durability ensures that the SS233 is a long-lasting investment for contractors.

In summary, the Multiquip SS233 concrete saw combines powerful performance, versatile cutting capabilities, and user-friendly design to meet the needs of construction professionals. Its advanced features, including a dust-control system and adjustable handle, make it a highly efficient tool for a variety of cutting applications, ensuring that contractors can achieve precision and high-quality results on the job.