3.Avoid accidental starting. Be sure the circuit supplying electrical power is off before plugging in. Plugging in a Sump Pump with the electrical circuit on invites accidents.
4.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the Sump Pump in unexpected situations.
5.
Always wear eye protection. Wear ANSI approved safety impact goggles and nonskid rubber boots. A hard hat must be used for appropriate conditions.
TOOL USE AND CARE
1.Do not force the Sump Pump. Use the correct Pump for your application. The correct Pump will do the job better and safer at the rate for which it is designed.
2.Do not use the Sump Pump if the electrical circuit system does not turn it on or off. Any electrical circuit system that cannot be controlled is dangerous and must be repaired or replaced.
3.Turn off the electric power to the outlet supplying power to the Sump Pump and disconnect the Pump’s Power Plug from the outlet before making any adjustments, changing accessories, or storing the Sump Pump. Such preventive safety measures reduce the risk of starting the tool accidentally.
4.Store idle tools and equipment out of reach of children and other untrained persons. Tools and equipment are dangerous in the hands of untrained users.
5.Maintain the Sump Pump with care. Keep the Pump clean. Properly maintained Sump Pump equipment is easier to control. Do not use damaged equipment. Tag damaged equipment “Do not use” until repaired.
6.Check for misalignment or binding of moving parts, broken parts, and any other condition that may affect the Sump Pump’s operation. If damaged, have the Pump serviced before using. Many accidents are caused by poorly maintained tools and equipment.
7.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another Sump Pump.
SKU 92481 | For technical questions, please call | PAGE 4 |