Specifications
Model LP700
High-Pressure Plunger Pump
Volume | 7.9 GPM |
Maximum Discharge Pressure | 7250 PSI |
Maximum Inlet Pressure | Up to 90 PSIG1 |
RPM | 1000 |
Plunger Diameter | 18mm |
Stroke | 42mm |
Crankcase Oil Capacity | 102 fl. oz. |
Temperature of Pumped Fluids | Up to 104 oF |
Inlet Port | 2 x 3/4" NPT |
Discharge Ports | 2 x 1/2" NPT |
Shaft Rotation | Either Direction2 |
Weight | 173 lbs. |
Width | 20.9" |
Height | 7.9" |
| LP700 HORSEPOWER CHART |
| ||||
RPM | GPM | 3000 PSI | 5000 PSI | 6000 PSI | 7250 PSI | |
500 | 3.9 | 8.1 | 13.5 | 16.3 |
| 19.6 |
600 | 4.7 | 9.8 | 16.3 | 19.6 |
| 23.7 |
700 | 5.3 | 11.0 | 18.4 | 22.1 |
| 26.7 |
800 | 6.3 | 13.1 | 21.9 | 26.3 |
| 31.7 |
900 | 7.1 | 14.8 | 24.7 | 29.6 |
| 35.7 |
1000 | 7.9 | 16.5 | 27.4 | 32.9 |
| 39.8 |
HORSEPOWER RATINGS: The rating shown are the power
requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horse- power requirements, use the Follow- ing formula:
HP = (GPM X PSI) / 1440
3