Giant MP4130HT(C) service manual Information. Phone 419

Page 7

8.From the back of the manifold (#43), remove the packing assembly (#'s 42, 41, 40, and 39) by tapping assembly out from the back to the front.

10.Note: The following procedure is only neces- sary if a stud bolt (#49) has been damaged and must be replaced. To remove the manifold studs (#49), place a stud nut (#50), lock washer (#50A), and second nut on each stud. Tighten the nuts against each other. Hold the front nut with one wrench, and remove the stud bolt by turning the rear nut counterclockwise with another wrench. To reassemble, turn the front stud bolt nut clockwise.

36

39

40

41

9.Turn the manifold (#43) over and remove the rear v-sleeve snap

ring (#36). Remove rear pressure ring (#39) , rear v-sleeve (#40) and rear support ring (#41). These parts should slide out with little resistance. If necessary, a screwdriver may be used to pry outward. Replace all rubber parts and inspect the metal parts for wear.

11.To remove the ceramic plungers, turn the plunger bolt (#29C) counterclockwise with a 13mm socket. Use a steady torque to prevent ceramic plunger sleeve damage. Loosen and remove the plunger bolt assembly (#29C and #29D) and replace the seal washer (#29D).

 

Contact Giant Industries for service school

31

information. Phone: (419) 531-4600

11a. Inspect the crankcase oil seals (#31) for evidence of leaking. If there is oil on the crankcase (#1) at the sight of the oil seals, they must be replaced. The oil seals are replaced after removing the crosshead/ plunger assembly (#25) as described below.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model MP4130HTC Important Operating Conditions Installation InstructionsPulley Information Horsepower InformationExploded View MP4130HTC MP4130HTC Repair Kits MP4130HTC Parts ListPART# Description QTY Repair Instruction MP4130HTC Disassembly sequence of the Giant MP4130HTC Series PumpsInformation. Phone 419 Gear End Disassembly Page Position Item# Description MP4130HTC Torque SpecificationsPump System Malfunction Giant Industries Limited Warranty

MP4130HT(C) specifications

The Giant MP4130HT(C) is a remarkable piece of machinery designed for heavy-duty applications in various industrial sectors. This model embodies advanced engineering and cutting-edge technology, making it a preferred choice for professionals seeking efficiency and reliability in their operations.

One of the standout features of the MP4130HT(C) is its powerful engine. Equipped with a high-performance engine, it provides robust torque and horsepower, enabling it to handle even the most demanding tasks with ease. The engine is designed to be fuel-efficient, ensuring lower operating costs while also adhering to stringent emissions standards.

The MP4130HT(C) boasts an innovative hydraulic system that enhances its operational capabilities. This system ensures smooth and precise control, allowing operators to execute tasks with high accuracy. The hydraulic components are designed for high performance, ensuring that the machine can lift and transport heavy loads efficiently.

Another key characteristic of this model is its advanced control system. The user-friendly interface allows operators to easily monitor and adjust various parameters, enhancing productivity. This system is equipped with features like diagnostics and performance tracking, which facilitate maintenance and improve overall machine longevity.

The Giant MP4130HT(C) also prides itself on its exceptional build quality. Constructed with durable materials, it is built to withstand harsh working environments. The rugged design reduces wear and tear, resulting in lower maintenance requirements and extended service life.

Additionally, the machine offers excellent maneuverability, thanks to its compact dimensions and agile steering capabilities. This allows it to navigate tight spaces with ease, making it suitable for a variety of applications, from construction sites to agricultural tasks.

Safety is another critical feature integrated into the design of the MP4130HT(C). The machine is equipped with multiple safety mechanisms, ensuring the protection of the operator and surrounding personnel. Features like overload protection and stability control enhance operational safety.

Overall, the Giant MP4130HT(C) stands out as a versatile, efficient, and robust solution for industrial applications. With its powerful engine, advanced hydraulic system, and superior build quality, it is a testament to modern engineering, delivering performance that meets the diverse needs of its users.
Top Page Image Contents