Sears 17651, 17892 manual Preuer FE, Hismachineis fitted wlzha zigzagPr, Changing Euer FEn, Miser f

t

)

F_. i

Fig. 2

FIo. 4

PREUER FE_

/'hismachineis fitted wlzha zigzagP_r

1.Straight stitch foot 2, Satin stitch foot

3, Buttonhole foot

4.Built.in buttonhole guide foot

6.Zipper foot

CHANGING _EUER FEn

Make sure needle is tn the up position, Raise presser foot lever.

_.on	miser f_
. Raise	foot	_	leVer 1o remove zne
foot,	{Fig,	1)

2, Place desired foot on the needle plate

aligning _te holes, Lower the p_r foot le_ so that foot holder snaps on the foot, (Fig. 2)

One.pkN:e presser feet (Fig, 3)

1, L_n IXesser foot thumb scxew and remove the foQt holder,

2, Insert _red foot from the left, Lower the presser foot lever and tighten the

screw using the large screw ddver to make certain the foot is secure.

For m_lnas with prestJey foot lock (Fig, 4).

To change presser feet, simply drop Pr_r Foot L_k and slip foot away from the

Presser Bar. Raise Pr_r Foot L_r _ond

the normal up position and place _ foot on presser bar, To lock foot securely, raise presser foot lock es high as possible,

FEED COVER PLATE

There are a few ti_ when you want to control the feeding of the fabric yourself. Raise needle to its highest position and raise presser foot, Place feed cover plate over needle plate aligning two pins of feed cover

plate with ho_ of _e plate. Yo_ may then determine the movement of the fabrk_

i4