Philips MZ1000 Presetting radio stations, ÖAutomatic preset programming, To exit programming mode

Radio Reception

Presetting radio stations

You can preset up to 40 radio stations in the memory.

IMPORTANT!

When “P” appears on the display, it only enables preset number selection.

Press ÉÅ to toggle between frequency tuning and preset number selection.

öAutomatic preset programming ☞

It enables you to programme all available radio stations automatically from a selected preset number, starting from FM and followed by MW band.

If no preset number is shown, automatic preset will begin from preset (1) and all your former presets will be overridden.

Note:

–If a radio station has been stored in one of the presets, it will not be stored again under another preset number.

To exit programming mode

●Press PROGRAM or Ç.

öManual preset programming ☞

It enables you to programme only the favourite radio stations.

●Hold down S T for fast tuning, release it when the frequency indication starts to change. For tuning to a weak reception radio station, press S T briefly and repeatedly.

●Repeat the steps again to store other radio stations.

Notes:

–If you attempt to programme more than 40 preset radio stations, "PROGRAM FULL" is displayed.

–During programming, if no key is pressed within 20 seconds, the system will exit the programme mode automatically.

To exit without storing the preset setting

●Press Ç.

In tuner mode,

➠	99 80
	P 01

make sure “P” appears, if not pressÉÅ.

In tuner mode,

/	➠
select a preset	press and hold
number	until “AUTO”
	appears

PROG	/
99 80
P 01

tune to a radio

station

PROG
99 80	/
P 01

select a preset

number

store setting and exit programming mode

English

13

3139 115 21642