Sears 385 owner manual Important Safety Instructions

Page 3

IMPORTANT SAFETY

INSTRUCTIONS

Your sewing machine is designed and constructed only for HOUSEHOLD use.

Read all instruction before using this sewing machine.

DAN G ER- To reduce the risk of electric shock:

1An appliance should never be left unattended when plugged in. Always

unplug this appliance from the electric outlet immediately after using and before cleaning.

2. Always unplug before relamping. Replace bulb with same type rated

15Watts.

3.Do not reach for the appliance that has fallen into water. Unplug immediately,

4.Do not place or store appliance where it can fall or be pulled into a tub or sink, Do not place in or drop into water or other liquid.

WAR N ING- To reduce the risk of burns, fire, electric shock,

or injury to persons.

1.Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or near children.

2Use this appliance only for its intended use as described in this manual.

Use only attachments recommended by the manufacturer as contained in this manual.

3.Never operate this appliance if it has a damaged cord or plug, if it is not

working properly, if it has been dropped or damaged, or dropped into

water, Return the appliance to the nearest authorized dealer or service

center for examination, repair, electrical or mechanical adjustment,

4.

Never operate

the

appliance

with

any

air opening

blocked.

Keep

 

 

 

 

 

 

 

 

 

 

 

ventilation

openings

of the

sewing

machine

and foot

controller

free from

 

accumulation

of

lint,

dust,

and

loose cloth.

 

 

 

S, Never drop or insert any object into any opening.

6.Do not use outdoors.

7.Do not operate where aerosol (spray) products are being used or where oxigen is being administered.

8, To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10.Keept fingers away from all moving parts. Special care is required

around the sewing machine needle.

11.Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching.

It may deflect the needle causing it to break.

14.Switch the sewing machine off ("O") when making any adjustment in

the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.

15. Always unplug the sewing machine from the electrical outlet when

removing covers, lubricating, or when marking any other user servicing

adjustments mentioned in the instruction manual.

SAVE THESE INSTRUCTIONS

Page 2 Page 4
Image 3
Page 2 Page 4
Contents SEA/RS Kenmore Sewing Machine SEARS, Roebuck and COImportant Safety Instructions Table of Contents Locate and Identify the Parts Portable Case or Cabinet is AvailableSect on 1. Know Your Machine Needle set Identify the AccesSoriesX represents numbers 00O through Light/power switch is turned on. If you areYour machine will not operate unless ChildrenSet Up the Machine Macpi ESet the Pressure Dial Adjust the Presser Foot Lever Presser Foot Lever raises and lowers your presser footHigh Lid of the accessory storage box lifts open toward you Pull gently toward you Extension table will snap outTo Attach Sectjon 2. Prepare Your Machine for Sewing Darning socks or mending knees, elbowsOr areas of wear in childrensclothes Match the hole in the foot holder with the threaded hole To AttachKnow What the Presser Feet Will Do Check Your Presser Foot To Remove To Attach Change the Presser FootPin Presser Foot Types Zigzag Foot Straight FootKnow What the Presser Feet Will Do Presser Foot TypesUse This Check Your Needle Ripar 10-12stitchesTo Change Your Needle Wind the Bobbin Prepare the BobbinSection !2 Prepare Your Machine for Sewing To Remove the Bobbin from the MachineYou Through Tension Toward Threading chart is located behind the face cover platePrepare Your MACHIN6.!P-OfNG Prepare the Bobbin Insert the Bobbin into the Bobbin HolderPrepare Your Top Thread Thread Your Needle Prepare Your Top Thread Pick Up Your Bobbin Thread Prepare Your Machine ForsewingThread will Adjust the Top Thread TensionType of stitch Tension is too looseTop Tension Too Tight Loose Just Right Fabric when selecting a stitchPrepare Your Machinefor Sewing Stitch SelectorWidlh Adjusting Stretch Stitch BalanceStitch Width Control Stitch Length ContrOl Prepare Your Machine for SewingSuitable Reverse Stitch Control Starting To SewStitch on Scrap Plan toPractical Stitch Chart III luRefer to 6Yellow35 49Orange35Check38 Chort On p On p Learn the StitchesStitch Section Learn StitchesStraight Stitches Control orange HeresHowUse the Darning Plate Topstitching Set the MachineStraight Stretch DarningZigzag Stitches Stretch Stitch Zigzag footOr as a decorative stitch Satin Stitch Set the Machine Stitch width Top thread tension Applique Bar Tacking Set the Machine Control to Top Thread tension Control 2 toControl To t Baste Fuse With Iron-on Monogramming Machine Embroidery Set the MachineSet the same as satin stitch Top thread tension control 2 to Stitch several timesSew a Button Stitch width controlSet the Machine Stitch width control 2 to Zigzag Stitches Overcasting StitchControl 3 to Control Io ttMending Three-Step ZigzagFop thread tension Control 0 5 toRaveling Needle, which effectively Overcast Stretch StitchingWidth Blind HemmingTrim excess fabric close to stitching Lace WorkButtonhole Making Learning to Sew ButtonholesHave two Lower GarmentLearn the Stitches Template 213504005 213505006 213506007 Sizes 15/16 13/16 Buttonhole Making Using Buttonhole AttachmentFtook Buttonhole guide plate Fabrics Fine stitches for light As shown Reset stitch length at 2 and topThread tension at 2 to Fold back the left seam allowanceTop side of fabric LearnthestitchesHe re1.How Two-Point Shell StitchingStretch Patching SmockingHerring Bone Stretch Fagoting StitchBox Stitching ElasticStretch StitchTwo-point Box Stitch Overedging Stitch Decorate with Geometric Patterns Tile Stitches and T!leir UsesSpecial effects What to Do When PerformanceHolder Thread caught Hook Race Lint in bobbin Holder Or hook raceReplace the Light Bulb Clean the Bobbin Holder Care for Your MachineReplace Shown above Clean the Hook Race and Feed Dogs Oiling the MachineBobbin holder so the knob fits NextParts List 213506007 Index 19-20 Memo Memo SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, IL Warranty385 SEARS, Roebuck and CO., Chicago, IL60684 U.S.A

385 specifications

The Sears 385 is a notable sewing machine that has earned a reputation for its reliability and versatility among sewing enthusiasts. Launched in the early 1980s, it became a staple for many home sewers due to its robust construction and user-friendly design. The 385 model is often praised for being a capable machine for beginners and more advanced sewers alike.

One of the main features of the Sears 385 is its range of stitch options. It typically includes a variety of built-in stitches, such as straight, zigzag, and decorative stitches, allowing users to execute a wide array of sewing techniques. These stitch functionalities enable creativity in garment construction, quilting, and home decorating projects. The ability to adjust stitch length and width also adds to its versatility, catering to different fabric types and project requirements.

The machine is equipped with a reliable mechanical drive system, providing steady and consistent sewing performance. This feature is particularly valuable for users who require precision in their sewing work. The foot pedal control allows for easy speed regulation, making it simpler to manage delicate tasks or heavy fabric layers.

Another characteristic of the Sears 385 is its robust construction. The metal body and internal mechanics not only provide durability but also contribute to stable operation. This sturdiness ensures that the machine can handle a variety of fabric types, from lightweight chiffon to heavier canvas and upholstery materials, without skipping stitches or grinding.

In terms of technology, the 385 model may come with a drop-in bobbin system, which simplifies the bobbin loading process. This user-friendly feature allows for efficient thread changes and minimizes the time spent on setup. Additionally, the machine often includes an automatic needle threader, a significant convenience for users who find threading challenging.

Sears also designed the 385 with practicality in mind. The machine typically includes a carrying handle, making it easier to transport for sewing classes or craft fairs. An accessory storage compartment is often included, helping keep essential tools like presser feet, needles, and scissors organized and easily accessible.

In summary, the Sears 385 sewing machine stands out for its combination of versatility, durability, and user-friendly features. Whether for hobbyists or those looking to enhance their sewing skills, the 385 provides a dependable platform for a wide range of sewing tasks. Its thoughtful design and robust performance continue to be appreciated by many in the sewing community.
Top Page Image Contents