C030, C031, C033, C032, C034, C035, C038, C039

●C GROUP: INTELLIGENT TERMINAL FUNCTIONS

Code		Function Name	Monitored data or setting
monitoring	C030	Digital current monitor reference value	SJ700:0.20 x "rated current" to 2.00 x "rated current" (A) / SJ700B:0.20 x "rated current" to 1.50 x "rated current" (A)
monitoring			(Current with digital current monitor output at 1,440 Hz)
Analog
terminals	C031	Terminal (11) active state	00(NO) / 01(NC)
terminals	C033	Terminal (13) active state	00(NO) / 01(NC)
Intelligent	C032	Terminal (12) active state	00(NO) / 01(NC)
Intelligent	C034	Terminal (14) active state	00(NO) / 01(NC)
output	C034	Terminal (14) active state	00(NO) / 01(NC)
output	C035	Terminal (15) active state	00(NO) / 01(NC)
	C036	Alarm relay terminal active state	00(NO) / 01(NC)
	C038	Low-current indication signal output mode selection	00 (output during acceleration/deceleration and constant-speed operation),
	C038	Low-current indication signal output mode selection	01 (output only during constant-speed operation)
			01 (output only during constant-speed operation)
	C039	Low-current indication signal detection level	SJ700:0.0 to 2.00 x "rated current" (A) / SJ700B:0.0 to 1.50 x "rated current" (A)
	C040	Overload signal output mode	00 (output during acceleration/deceleration and constant-speed operation),
	C040	Overload signal output mode	01 (output only during constant-speed operation)
			01 (output only during constant-speed operation)
	C041	Overload level setting	SJ700:0.0 to 2.00 x "rated current" (A) / SJ700B:0.0 to 1.50 x "rated current" (A)
status	C042	Frequency arrival setting for accel.	0.00 to 99.99, 100.0 to 400.0 (Hz) (*1)
status	C044	PID deviation level setting	0.0 to 100.0 (%)
	C043	Frequency arrival setting for decel.	0.00 to 99.99, 100.0 to 400.0 (Hz) (*1)
terminal	C045	Frequency arrival setting for acceleration (2)	0.00 to 99.99, 100.0 to 400.0 (Hz) (*1)
terminal	C052	Maximum PID feedback data	0.0 to 100.0 (%)
	C046	Frequency arrival setting for deceleration (2)	0.00 to 99.99, 100.0 to 400.0 (Hz) (*1)
output	C053	Minimum PID feedback data	0.0 to 100.0 (%)
	C055	Over-torque(Forward-driving) level setting	SJ700: 0. to 200. (%) < 75kW and over:0. to 180.>
	C055	Over-torque(Forward-driving) level setting	SJ700B: 0. to 150. (%)
and			SJ700B: 0. to 150. (%)
and	C056	Over-torque(Reverse-regenerating) level setting	SJ700: 0. to 200. (%) < 75kW and over:0. to 180.>
Levels	C056	Over-torque(Reverse-regenerating) level setting	SJ700B: 0. to 150. (%)
			SJ700B: 0. to 150. (%)
	C057	Over-torque(Reverse-driving) level setting	SJ700: 0. to 200. (%) < 75kW and over:0. to 180.>
	C057	Over-torque(Reverse-driving) level setting	SJ700B: 0. to 150. (%)
			SJ700B: 0. to 150. (%)
	C058	Over-torque(Forward-regenerating) level setting	SJ700: 0. to 200. (%) < 75kW and over:0. to 180.>
	C058	Over-torque(Forward-regenerating) level setting	SJ700B: 0. to 150. (%)
			SJ700B: 0. to 150. (%)
	C061	Electronic thermal warning level setting	0. to 100. (%)
	C062	Alarm code input	00(Disabled) / 01(3-bit) / 02(4-bit)
	C063	Zero speed detection level	0.00 to 99.99, 100.0 (Hz)
	C064	Heat sink overheat warning level	0. to 200.0 (℃)
function	C071	Communication speed selection	02 (loopback test), 03 (2,400 bps), 04 (4,800 bps), 05 (9,600 bps), 06 (19,200 bps)
function	C072	Node allocation	1. to 32.
	C072	Node allocation	1. to 32.
	C073	Communication data length selection	7 (7 bits), 8 (8 bits)
Communication	C074	Communication parity selection	00 (no parity), 01 (even parity), 02 (odd parity)
Communication	C075	Communication stop bit selection	1 (1 bit), 2 (2 bits)
	C075	Communication stop bit selection	1 (1 bit), 2 (2 bits)
	C076	Selection of the operation after communication error	00 (tripping), 01 (tripping after decelerating and stopping the motor), 02 (ignoring errors),
	C076	Selection of the operation after communication error	03 (stopping the motor after free-running), 04 (decelerating and stopping the motor)
	C077	Communication timeout limit before tripping	0.00 to 99.99 (s)
	C078	Communication wait time	0. to 1000. (ms)
	C079	Communication mode selection	00(ASCII), 01(Modbus-RTU)
Adjustment	C081	O input span calibration	0. to 9999., 1000 to 6553(10000 to 65530)
	C082	OI input span calibration	0. to 9999., 1000 to 6553(10000～65530)
	C083	O2 input span calibration	0. to 9999., 1000 to 6553(10000～65530)
	C085	Thermistor input tuning	0.0 to 999.9, 1000.
	C091	Debug mode enable	(Do not change this parameter, which is intended for factory adjustment.)
Others	C101	UP/DOWN memory mode selection	00 (not storing the frequency data), 01 (storing the frequency data)
	C102	Reset mode selection	00 (resetting the trip when RS is on), 01 (resetting the trip when RS is off),
	C102	Reset mode selection	00 (starting with 0 Hz), 01 (starting with matching frequency),
			02 (enabling resetting only upon tripping [resetting when RS is on])
	C103	Restart mode after reset	02 (restarting with active matching frequency)
			02 (restarting with active matching frequency)
adjustment	C105	FM gain adjustment	50. to 200. (%)
adjustment	C107	AMI gain adjustment	50. to 200. (%)
	C106	AM gain adjustment	50. to 200. (%)
Meter	C109	AM bias adjustment	0. to 100. (%)
Meter	C110	AMI bias adjustment	0. to 100. (%)
Terminal	C111	Overload setting (2)	SJ700:0.0 to 2.00 x "rated current" (A) <75kW and over:0.0 to 1.80 x "rated current">
Terminal	C111	Overload setting (2)	SJ700B:0.0 to 1.50 x "rated current" (A)
Adjustment	C121	O input zero calibration	0. to 9999., 1000 to 6553 (10000 to 65530)
Adjustment	C123	O2 input zero calibration	0. to 9999., 1000 to 6553 (10000 to 65530)
	C122	OI input zero calibration	0. to 9999., 1000 to 6553 (10000 to 65530)
	C130	Output 11 on-delay time	0.0 to 100.0 (s)
	C131	Output 11 off-delay time	0.0 to 100.0 (s)
	C132	Output 12 on-delay time	0.0 to 100.0 (s)
function	C133	Output 12 off-delay time	0.0 to 100.0 (s)
function	C134	Output 13 on-delay time	0.0 to 100.0 (s)
	C134	Output 13 on-delay time	0.0 to 100.0 (s)
	C135	Output 13 off-delay time	0.0 to 100.0 (s)
operation	C136	Output 14 on-delay time	0.0 to 100.0 (s)
operation	C139	Output 15 off-delay time	0.0 to 100.0 (s)
	C137	Output 14 off-delay time	0.0 to 100.0 (s)
	C138	Output 15 on-delay time	0.0 to 100.0 (s)
terminal	C140	Output RY on-delay time	0.0 to 100.0 (s)
terminal	C142	Logical output signal 1 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)
	C141	Output RY off-delay time	0.0 to 100.0 (s)
Output	C143	Logical output signal 1 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)
Output	C144	Logical output signal 1 operator selection	00 (AND), 01 (OR), 02 (XOR)
	C144	Logical output signal 1 operator selection	00 (AND), 01 (OR), 02 (XOR)
	C145	Logical output signal 2 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)
	C146	Logical output signal 2 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)
	C147	Logical output signal 2 operator selection	00 (AND), 01 (OR), 02 (XOR)
	C148	Logical output signal 3 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)

(*1) 4000HF:0.00 to 99.99, 100.0 to 120.0(Hz)

			［◯= Allowed×= Not permitted				］
			［◯= Allowed×= Not permitted				］
	Default Setting				Setting	Change
		SJ700		SJ700B	during operation during operation
-FE(CE) -FU(UL)			-F(JP)	SJ700B	(allowed or not) (allowed or not)
		Rated current of			○	○
		inverterx 1..0			○	○
		inverterx 1..0			×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○
01		01	01	01	×	○
01		01	01	01	×	○
Rated		current		1..0	×	○
Rated		current	of inverterx	1..0	×	○
01		01	01	01	×	○
Rated		current		1..0	×	○
Rated		current	of inverterx	1..0	×	○
0.00		0.00	0.00	0.00	×	○
0.00		0.00	0.00	0.00	×	○
3.0		3.0	3.0	3.0	×	○
0.00		0.00	0.00	0.00	×	○
0.00		0.00	0.00	0.00	×	○
100.0		100.0	100.0	100.0	×	○
0.0		0.0	0.0	0.0	×	○
100.		100.	100.	100.	×	○
100.		100.	100.	100.	×	○
100.		100.	100.	100.	×	○
100.		100.	100.	100.	×	○
80.		80.	80.	80.	×	○
00		00	00	00	×	○
0.00		0.00	0.00	0.00	×	○
120.		120.	120.	120.	×	○
04		04	04	04	×	○
1.		1.	1.	1.	×	○
7		7	7	7	×	○
00		00	00	00	×	○
1		1	1	1	×	○
02		02	02	02	×	○
0.00		0.00	0.00	0.00	×	○
0.		0.	0.	0.	×	○
00		00	00	00	×	○
					×	○
		Factory set			×	○
		Factory set			×	○
					×	○
					×	○
00		00	00	00	×	×
00		00	00	00	×	○
00		00	00	00	○	○
00		00	00	00	×	○
100.		100.	100.	100.	○	○
100.		100.	100.	100.	○	○
100.		100.	100.	100.	○	○
0.		0.	0.	0.	○	○
20.		20.	20.	20.	○	○
		Rated current of			×	○
		inverterx 1..0			×	○
		inverterx 1..0			○	○
					○	○
		Factory set			○	○
					○	○
0.0		0.0	0.0	0.0	○	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
0.0		0.0	0.0	0.0	×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○
00		00	00	00	×	○

●C GROUP: INTELLIGENT TERMINAL FUNCTIONS

Code

C030

Digital current monitor reference value

C031

C033

C032

C034

C035

C038

C039

C040

C041

C042

C044

C043

C045

C052

C046

output

C053

C055

C056

Levels

C057

C058

C061

C062

C063

C064

C071

C072

C073

C074

C075

C076

C077

C078

C079

C081

C082

C083

C085

C091

Others

C101

C102

C103

C105

C107

C106

C109

C110

C111

C121

C123

C122

C130

C131

C132

C133

C134

C135

C136

C139

C137

C138

C140

C142

C141

C143

C144

C145

C146

C147

C148

(*1) 4000HF:0.00 to 99.99, 100.0 to 120.0(Hz)

SJ700

100.

100.