(up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire.
18.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
19.People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
20.Keep hands away from the needle when you turn the power switch on, or while the machine is operating.
21.Do not place your fingers into the thread
22.During operation, never place your head, hair, or hands in the proximity of the hand wheel,
23.Do not operate the machine with any safety guards removed.
24.This machine shall only be operated by appropriately trained operators.
25.For your personal protection, we recommend you wear
26.If oil or grease comes in contact with your eyes or skin, immediately wash the affected areas and consult a physician.
27.Tampering, modifying or altering any device (aside from the cord and plug by a licensed electrician) on the machine is prohibited and will void manufacturer’s warranty.
28.Repair, adjustment, and specific maintenance shall only be performed by a quali- fied service technician. Alteration or replacement of the 3 prong grounded electrical plug provided with the machine must only be performed by a licensed electrician. This machine must be properly grounded.
Note: Performance of this tool may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.
Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure that the parts shown in the photo on the following page are included. Note that the machine table shown is not included, and must be ordered separately. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
SKU 92966 | For technical questions, please call | Page |