Husqvarna C10, C20 manual Important Safety Instructions

Page 3

This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the following:

Read all instructions before using this household sewing machine.

DANGER - To reduce the risk of electric shock:

A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning.

Always unplug before relamping. Replace bulb with same type rated 5 Watt.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:

Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children or infirm person.

Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual.

Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorised dealer or service center for examination, repair, electrical or mechanical adjustment.

Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.

Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

Always use the proper needle plate. The wrong plate can cause the needle to break.

Do not use bent needles.

Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.

Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

Never drop or insert any object into any opening.

Do not use outdoors.

Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.

To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

SAVE THESE INSTRUCTIONS

Image 3
Contents C10/20 Symbol Instructions Important Safety Instructions Contents FREE-MOTION, DARNING, Embroidery and Monogramming Replacing the Light Bulb Maintenance Principal Parts of the Machine Needle up/down button Buttons of the MachineOperation buttons Reverse button Auto-lock buttonPattern mirroring Mode selectionFunction buttons Stitch length Stitch widthLCD Screen Model C10 Direct PatternPattern Alphabet LCD Screen Model C20Direct selection patterns Pattern selection by number Pattern Chart Model C10Pattern Chart Model C20 Accessories For USA and Canada Connecting the Machine to the Power SourceSpeed adjustment lever Starting SewingFoot control Changing the Presser Foot Replacing the NeedleAdjusting Presser Foot Pressure Matching NEEDLE/ FABRIC/ ThreadPlease Note Presser Foot Application Type of Presser Foot ChartWinding the Bobbin Page Inserting the Bobbin Threading the Upper Thread Page Needle Threader TOP Thread Tension Cutting the Thread Bringing UP the Bobbin ThreadRaise or Lower the Feed Dogs Presser Foot LiftOperation Buttons Auto-lock button Stitch width button Function ButtonsMode selection button Stitch length buttonModel C20 only Pattern mirroring button Selection Buttons Direct pattern selection buttonsNumber buttons Memory Buttons Free arm Useful SkillsSewing corners ReverseSewing on heavy fabric Zigzag Stitches Straight Stitches and Needle PositionStretch Stitches Using the overcasting foot Using the standard footOvercasting Stitches Blindhem Button Sewing Buttonhole Stitching Starting Point Page Making a corded buttonhole on stretch fabrics Eyelet Stitch Darning Stitch Page Inserting a centered zipper Zipper InsertionQuilting Darning FREE-MOTION, DARNING, Embroidery and MonogrammingMonogramming EmbroideryMirroring Programming patterns Memory Model C10Clearing patterns Adding patternsRecall and sew the memorized pattern Memory Model C20 Clearing patterns or letters Adding patterns or lettersRecall and sew the memorized pattern Buttonhole lever is not lowered Instruction animation message display Bobbin windingPush bobbin winder stop to sewing position Replacing the Light Bulb Cleaning the hook MaintenanceCleaning the screen Cleaning the sewing machine surfacePage Problem Cause Correction Troubleshooting GuideDecrease the presser foot pressure Presser Functions Quick Reference Chart Model C10Foot Utility Quick Reference Chart Model C20~3.0 Adjustments can be made Page VSM Group AB SE-561 84 Huskvarna Sweden

C10, C20 specifications

Husqvarna, a leading brand in outdoor power equipment, has made significant strides in the chainsaw market with the introduction of the C20 and C10 models. These chainsaws are designed for both professional users and enthusiasts, offering a blend of power, efficiency, and innovative features tailored to meet various cutting needs.

The Husqvarna C20 chainsaw stands out with its robust 20-inch bar, making it ideal for felling larger trees and cutting firewood. It is powered by a reliable 50cc engine that delivers impressive torque, allowing for faster cutting speeds and reduced fatigue during extended use. The C20 is equipped with Husqvarna's X-Torq engine technology, which reduces fuel consumption and harmful emissions without compromising performance. This feature not only helps the environment but also provides users with longer running times between fuel refills.

Additionally, the C20 incorporates an easy start system that minimizes pull resistance on the starter cord, making it accessible to users of all skill levels. The air purge function ensures the carburetor remains primed, further enhancing starting efficiency. For safety, the chainsaw includes a chain brake that activates in case of kickback, protecting the user from potential injuries.

On the other hand, the Husqvarna C10 is designed for lighter-duty tasks, featuring a 16-inch bar and a slightly smaller engine. This model excels in ease of handling, making it a perfect choice for homeowners and those new to chainsaw operation. The C10 incorporates many of the same technologies as its big brother, including the X-Torq engine, ensuring that it is both efficient and environmentally friendly.

Both models come equipped with adjustable oil pumps, allowing users to customize the oil flow to the chain based on their specific cutting conditions. This feature not only prolongs bar and chain life but also enhances cutting performance. Furthermore, the ergonomic design of the handles contributes to comfortable operation during prolonged use, reducing strain on the user's hands and arms.

In summary, the Husqvarna C20 and C10 chainsaws bring powerful performance, innovative technology, and user-friendly features to the market. Whether you need a heavy-duty tool for professional tasks or a lighter chainsaw for home use, Husqvarna combines efficiency and safety to deliver reliable equipment that stands the test of time.