Janome 6500 manual Button Sewing

Page 52

Button Sewing

Machine Setting

Pattern:

08 (Mode 1)

Thread tension:3-7

Presser foot: Satin stitch foot F

Foot pressure: 3

Feed dog:

Dropped

Unthread the needle thread.

Adjust the stitch width so that the needle enters both holes in the button.

 

Place a button on the fabric and lower the needle by

 

turning the handwheel, so that the needle enters into the

 

left hole in the button.

 

Align the holes in the button with the slot on the foot and

 

lower it to hold the button in place.

 

Turn the handwheel to lower the needle into the right

 

hole in the button.

 

Adjust the stitch width if necessary.

 

Rethread the machine and sew about 10 stitches.

 

NOTE:

 

The LCD screen shows a warning to raise the feed dog,

1

but depress the foot control again to start sewing.

Raise the presser foot and remove the fabric.

Trim both needle and bobbin threads at the beginning.

Cut both threads leaving 20 cm (8”) tails.

3

 

Pull the bobbin thread to bring the needle thread to the

2

wrong side of the fabric then knot the threads.

 

1

Needle Thread at the Beginning

 

2

Bobbin Thread

 

3

Needle Thread

50

Image 52
Contents Page Important Safety Instructions Table of Contents Utility Stitches Know Your Machine Name of PartsStandard Accessories Controlling Sewing Speed Connecting the Power SupplyOperating Instructions Auto-Lock button When stitch pattern 01, 02, 08 or Has been Reverse button When stitch pattern 01, 02, 08 or Has beenFunction Buttons Thread cutter buttonMode button Stitch width adjusting buttonStitch length adjusting button LCD contrast adjusting dialPattern selection buttons Auto thread cutter buttonClear button Turnover memory buttonRaising and Lowering the Presser Foot Attaching the Knee LifterChanging the Presser Foot Detaching and Attaching the Foot HolderVariety of Presser Feet and Their Uses Winding the Bobbin Setting the spool of threadRemoving the bobbin Winding the bobbin Inserting the bobbin Threading the Machine Threading the Machine Automatic Needle Threader Drawing Up the Bobbin Thread Thread and Needle Chart Changing NeedlesAdjusting the tension Balancing Thread TensionCorrect tension Needle thread tension is too tightAdjusting the Foot Pressure Dropping the Feed DogSelecting the Sewing Mode Mode 1 DirectMode 2 Quilting Mode 3 UtilityHelp Button Selecting the PatternCustomizing Machine Settings Resumption settingSound setting Language selectionMachine Setting Straight StitchTo sew To sew from the edge of thick fabricUsing the seam guide lines Using the cloth guideChanging sewing direction Adjusting the needle drop position Adjusting the stitch lengthLock-a-Matic stitch Locking stitchTriple stretch stitch Stretch stitchBasting Attaching the darning foot P-2Adjusting the stitch width Zigzag StitchOvercasting with zigzag stitch Machine Setting Overcasting stitch Machine SettingMultiple zigzag stitch Tricot stitch Machine Setting Variety of Overcasting Stitches Modes 1Knit stitch Machine Setting Double overedge stitch Machine SettingOverlock stitch Machine Setting Variety of Overcasting StitchesTo attach the zipper foot E Zipper SewingFabric preparation To sew Page Rolled Hem Seaming patchwork pieces Machine Setting Patchwork stitches Machine SettingPatchwork Angle scale on the needle plateStitch in the ditch with even feed foot QuiltingQuilting bar for the even feed foot Freemotion quilting Machine Setting Quilting bar for the zigzag footClasp stitch Machine Setting Applique Machine SettingProgramming French Knots Buttonholes Sensor buttonholes Machine Setting LED Signal Auto thread cutterStep Double layer buttonhole Corded buttonholeChanging buttonhole width Changing buttonhole stitch densityAutomatic buttonhole Machine Setting Depress the foot control to sew the left side up to Button Sewing Darning To adjust the evenness of darning To sew a shorter darningTo sew the same size darning To sew the darning at a different sizeTacking To sew a shorter tackTo sew the same size tack To sew the tack at a different sizeAdjusting the shape of an eyelet EyeletHow to fold the fabric Blind HemChanging needle drop position To make the straight stitches in blind hem stitch LongerShell Tucking Scallop StitchCording Strand cordingTwin Needle Sewing Threading the machine for twin needleTo sew Programming a Pattern Combination One cycle sewing with the auto-lock stitchPattern combination Pattern combination with auto thread cuttingX 2 X 3 X 4 X Programming pattern combination with a mirror ImageSewing the current pattern from the beginning Sewing the pattern combination from the beginningMaking a copy and a mirror Image of programmed Patterns Editing Program Uniform stitch adjustment Modes 2 and 3 onlyUnified needle drop position Custom stitch adjustment Mode 2 and 3 only Storing and recalling the pattern combinationTo store a pattern combination To recall the stored pattern combinationMonogramming Mode Selecting a Letter StyleProgramming a Monogram Editing a Monogram Viewing a Long TextInserting a letter character Deleting a letter characterCorrecting Distorted Stitch Patterns Stretch stitch patternLetters and numbers Stitch balance of the auto buttonholeCleaning the Hook Race and Feed Dog Assemble the hook raceTo remove Replacing the Light BulbTo replace Problems And Warning Signals Cause Try thisAudible Signal Buzzer Sounds when Troubleshooting Supplementary Instructions

6500 specifications

The Janome 6500 is a versatile sewing machine renowned for its advanced features and user-friendly design, catering to both novice and experienced sewers alike. With its robust build and innovative technology, the 6500 stands out in the crowded market of sewing machines.

One of the most notable features of the Janome 6500 is its impressive stitch selection. It offers a variety of over 150 built-in stitches, including utility stitches, decorative designs, and alphanumeric fonts. This variety allows users to tackle a wide range of projects, from basic alterations to intricate quilting designs. The machine also includes a one-step buttonhole function, making it easier than ever to create perfect buttonholes with consistent results.

The 6500 boasts an extra-large sewing area, providing ample space for larger projects such as quilts or home decor items. Its extended arm makes maneuvering fabric a breeze, allowing for more freedom of movement. Additionally, the machine comes equipped with an adjustable speed control feature, enabling users to sew at their preferred pace, whether they're working on delicate fabrics or thick materials.

In terms of technology, the Janome 6500 incorporates a durable and efficient motor, which provides a high sewing speed of up to 1,000 stitches per minute. This efficiency is particularly beneficial for experienced sewists looking to complete projects quickly without compromising on quality. The machine also features a sophisticated needle threader, which simplifies the threading process and minimizes frustration.

Another remarkable characteristic of the 6500 is its LCD screen, which displays stitch information and settings clearly. This user-friendly interface allows for easy navigation through the various stitch options and adjustments. The machine also includes memory functions, permitting users to save custom stitch combinations for future projects.

The built-in walking foot and quilting guide make the Janome 6500 an excellent choice for quilters. These features ensure even feeding of multiple layers of fabric, producing smooth and professional results. Furthermore, the machine is compatible with a range of additional presser feet, expanding its capabilities.

In conclusion, the Janome 6500 is an exceptional sewing machine that combines a wealth of features, advanced technology, and user-friendly design. Its expansive stitch selection, large sewing area, and powerful motor make it a top choice for sewing enthusiasts eager to take their skills to the next level. Whether sewing garments, creating quilts, or crafting home projects, the Janome 6500 provides the tools necessary to bring any creative vision to life.