Troubleshooting
A
Condition
Patterns are distorted.
Pattern selection
key does not work.
Cause
1.The correct presser foot is not used.
2.The needle thread tension is too tight.
3.The embroidery hoop attaching knob is loose.
4.The carriage is bumping into something around the machine.
5.The fabric is not pulled tightly enough on the embroidery hoop.
6.The fabric is caught or pulled for some reason when sewing embroidery.
1.The bobbin winder spindle is in the winding position.
2.The control circuit is not working correctly.
3.Key position is out of alignment.
For customer assistance call or
9 am - 4:30 pm, CST, Monday - Friday
(U.S.A. only)
Reference
Use the correct foot. Pages 26, 32 Page 59
Page 59
Page 58
Stop the machine & Free the fabric.
Page 14
Turn the switch off & turn it on again. Page 21
83