Janome 4900 QC manual Square buttonhole

Page 41

q

w

Square buttonhole

 

 

Machine settings

 

 

 

q Pattern:

17 (Mode 2)

17

e

w Presser foot:

Automatic buttonhole foot R

 

e Thread tension: 1–5

 

 

NOTE:

The size of the buttonhole is automatically set by placing a button in the rear of automatic buttonhole foot R.

The button holder of the foot takes a button size of 0.5 cm (3/16˝) to 2.5 cm (1˝) in diameter.

It is sometimes necessary to change buttonhole size to match certain heavy or specific fabrics and threads. Make a test buttonhole on an extra piece of the fabric to check your settings.

The preset width of the buttonhole is suitable for ordinary buttons.

Apply an interfacing to stretch or fine fabrics.

 

 

To sew

z

q

z Press the up/down needle position button to raise the

 

needle.

 

 

 

 

Attach the automatic buttonhole foot R snapping the

 

 

pin into the groove of the foot holder.

 

 

q Groove

 

 

w Pin

 

 

w

x

x Pull the button holder to the back, and place the

 

button in it. Push it together tightly to the button.

NOTE:

If the button is extremely thick, make a test buttonhole on an extra piece of the fabric.

If it is difficult to fit the button through the test buttonhole, you can lengthen the buttonhole by pulling the button holder back a little. The length of the buttonhole will be increased.

e Button holder

e

3 9

Image 41
Contents Page Important Safety Instructions Table of Contents Table of Contents Name of parts Name of PartsStandard Accessories Free-arm sewing can be used for Detaching the tableAttaching the table To use foot control Connecting the Power SupplyTo use start/stop button Operating Instructions Speed control sliderFoot control Reverse stitch button Start/stop buttonAuto-lock button Up/down needle position buttonMode key see Screen brightness adjustment dialMonogramming key see Stock/Call key see page 295Stitch length adjustment key see page 28, 29 4Stitch width adjustment key see page 28, 296Function touchpad see 7Clear key seeMode 1 Screen indication Mode selectionMode 2 Monogramming modeMode 2, 3 and Monogramming Mode Pattern selection and screen indicationPattern Selection Example stitch patternSound setting Resumption settingLanguage setting Window duration time settingPresser foot lifter To drop or raise the feed dogPressure dial To remove and attach the foot holder Changing the presser footKnee Lifter To removeChanging the needle Needle Size Thread and Needle ChartRemoving the bobbin Setting the spool of threadBobbin Winding Additional spool pin y Spool Inserting the bobbin Threading the machine Built-in needle threader Drawing up bobbin thread Balancing thread tension Manual thread tension adjustmentAuto-thread tension Balanced thread tensionStraight stitch Machine settingsChanging sewing direction Securing a seamUsing the seam guides on the needle plate Using the quilting guideTurning a square corner Sewing on heavy fabricHelp button Adjusting the stitch length Adjusting the needle drop positionExample To change the preset value for the stitch length Restoring the original settingsAttaching the darning foot P BastingStretch stitch Lock-a-Matic stitchTriple stretch stitch New sculpture stitch Locking stitchSaddle stitch Programming French knots Example Combination of patterns 54 Decorative stitchFrench knot Zigzag stitch Adjusting the stitch widthAdjusting the stitch length Overcasting with zigzag stitch Types of Overcasting StitchesMultiple zigzag stitch Tricot stitch Overcasting stitchOverlock stitch Knit stitchDouble overedge stitch To sew Button sewingAttaching the button sewing foot T Round-end Buttonhole Variations of Buttonholes Square ButtonholeFine Fabric Buttonhole Keyhole ButtonholeSquare buttonhole Pull the buttonhole lever down as far as it will go Start the machine to sew the buttonhole Corded buttonhole Double layer buttonholeAdjusting stitch density Adjusting buttonhole widthAdjusting buttonhole width on stitch pattern #20 Adjusting buttonhole width on stitch pattern #18Round-end buttonholes #18 Keyhole buttonholes #20Faux chain buttonhole #25 Knit buttonhole #24Welted buttonhole Page ⁄2t Eyelet Fabric preparation Zipper sewingFold back the left seam allowance. Turn the right Page Darning To sew a shorter darning To adjust the evenness of darningTo sew the same size darning To sew the darning at a different sizeTo sew a shorter tack TackingTo sew the same size tack To sew a tack at a different sizeChanging needle drop position How to fold the fabricBlind hem Quilting EPintuckingApplique Shell tuckFagoting SmockingScallop B Scallop aSatin stitch PatchworkStrand cording Rolled hemCording Cross stitch Twin needle sewing Pattern combination Example Programming patterns 33, 35 Combinations for a mirror image Pattern Elongation Extender stitches Free-motion quilting Editing program Combining satin and decorative stitches Custom stitch adjustment Mode 2 and 3 only Programming a monogram Programming a monogram Reducing the size of a monogram Example To delete C from Abcd Viewing a long textEditing the programmed patterns Deleting a letter character Duplicating a pattern Inserting a letter characterExample To insert a space between B and C in Abcd To duplicate the stitch patternTo stock memory To store and call stitch pattern combinationsOverwriting a stored combination Deleting a stored combination Recalling a stored combinationStretch stitch pattern Correcting distorted stitch patternsLetters and numbers ExampleInserting the bobbin holder Cleaning the hook race and feed dogTo replace Replacing the light bulbReplacing the light bulb on the underside of the sewing arm Message Problem/Cause Try this Pip Normal operation Audible SignalsBeep sounds during Condition Cause Reference Troubleshooting