Kenmore 385.115518 HeresHow, + Monogramming Set the Machine, Embroidery Set the Machine

+Monogramming

Set the Machine

Stitch selector

•Embroidery

f

Set the Machine

Stitch selector

Top thread tens_en control 1 to 4

Satin stitch foot

Stitch ength 0 to 24

k,

Here's How

1.Set the same as satin stitch.

2.Back the fabric with paper or interfacing.

!.3. Draw the design on to the fabric with tailor's chalk.

4.Satin stitch, adjusting the stitch width as necessary to form each pattern.

5.If using paper, carefully remove it when you have finished sewing.

Top thread	tension	Stitch length
6ontrol 1 to	4	Any	number
		tO adjust)
_.		(not	necessary
footNo presser		O)
- Darning		plate

Here'sHow

1.Put the darning plate on the needle plate (see p. 2__33).

2.Remove presser foot.

3.Adjust the stitch width as desired (see p. 1__8).

4.Draw the design on to the fabric with tailor's chalk.

5.Stretch the fabric between

embroidery hoops and place under the needle.

6.Lower the presser foot lever to engage the top thread tension.

7.Holding the top thread in your left hand, rotate the hand wheel toward you one comp[ete turn.

Pull the top thread to draw the

bobbin thread through to the surface of the fabric.

8.Using a medium speed, stitch along

the marked outline, guiding the fabric carefu Ily by hand.

28