Kenmore 1660, 1947, 1357 manual Check, g Performance Problems What to do, Probabl Ecause

Check, g Performance Problems WHAT TO DO

	i
:_i;'PROBEEM_;::	PROBABL E:::CAUSE	CORRECTION

	Incormctisize ne_dl_:: :::- +::::	:= .
	improper::thmading_;i-::: ::::::i:__::-:: :=::_:
:	Loose:upper thread.-ten=ion:

i_,=_i	..... .igh,p,_ure: o_p:_,: foot.
.....':::-:-Stitches	Loose pmsser foot. :._:::
	Unevenly _ ound:bobbin.
	Nicks or burrs on :shuttle.	.

Nicks or burrs at:hole of needle plate.

Choose correct size needle for thread:and:fabric. ,Rethmad machine.

Tighten:upper thread tension;

Do not pull _fabric; guide it gently.

Increase:pressure on:presser foot;

Reset presserfoot," Rewind bobbin.

Replace shuttle; or polish off burrs_completely.

Replace needle plate;or polishoff:burrslicompletely.

Breaking

Needle

Bunching of

Thread

Pulling fabric: i:::i: ::

incorrect size needle.

Incorrect setting:of needle..

Loose presser foot:i

Upper and lower threads not drawn

back under presser foot before

starting seam,

Incorrect thmad tension(s), Light pressure on::presserfoot.

"''usingtw°_dztterent:::szzes:°r" -kinc!'- _ii:

Do not pull; fabric;guide it gently. :i : :;il

Choose correct size needle•for thread and fabric. Reset needle.

Reset presserfoot.-i_.....:

When starting a.seam be sum to draw_both threads tmd(_r and back of presser foot about 4" and hold::iuntila fewstitches

ere formed, :_

Reset thread:tension(s).:

Increase pressure on presser foot.

Upper thread and bobbin thread should;be same size and kind.

• ' '-.::_::::._:-"':: .._:*:_"_:_'_i_:?;:i!;::__':__'i:::i:i: ,:.-;_:: _'::: .. : ',_ ......','';.:":':_:'"': '_" 'i :): .:: .:;..::{:_::.;:. ::_:. :: ::...;.; :': '::.i._ :. • :._ : :' -i':':!: