Kenmore 19501 manual Stitch Width and Length Buttons, Stitch Width Button, Increase

Stitch Width and Length Buttons

All stitches m your Sensor Sew 70 are pre-set for the best stitch length and width, but if you wish to change the settings here's how:

You can set stitch width and length with these two buttons. (Use one at a time. The machine will remember the first one

while you set the other, without your having to press the memory button.)

Use the Plus "+" or minus "-" buttons to increase or decrease the stutch w_dth or length.

The indicator screen will show the stitch width or length you have sefected.

o Stitch Width Button

This button controls the width of zigzag stitches.

NOTE:	tf	you	press	the	stitch	wldth	button		while doing
	straight stitching, the stitch width light will go on and
	the	indicator		screen	will	show	"C",	Your		needle	is
	m	the	"Center"		tf you	press the		"+"	button,		the
	indicator		will	show	"R '° (Right).			If	you	press	the
	"--"	button, the indicator				wilt	show	"L"	(Left).

When you press this button for zigzag stltches, the stitch width

light witl go on and the indicator screen wilt show the preset stitch width of "5.0"-

NOTE:	The range of stitch width depends on the stitch pattern you select.
f

E3Gq

J

To

Decrease

the Stitch

Width:

To Increase

the

Stitch

Width:

Press the "-°'

button.

The

width

wilt

decrease

Press

the

"+"

button,

The zlgzag width

wilt

by

0.5 mm

to

"0.0"

each

t=me

you

press the

increase

by

0.5

mm up to "7.0" each time

you

button,

press

the

button.

To Adjust the Stitch Width Quickly:

Hold Down the "--" or "+" button until you reach the stitch w_dth you desire.

To Return to the Preset Stitch Width (or clear the stitch wtdth):

Press the Stitch Width button again (or press the Clear button).

The stitch width light and the indicator screen will go off.

32