Kenmore 385.12614 Section Prepare Machine for Sewing, Set Up Machine Choose Needle and Thread

				SECTION 2.	PREPARE	THE MACHINE FOR SEWING
Set Up the	Machine	(Continued)			Choose	the	Needle and Thread
• Free-Arm	Sewing:	the Removable	• Accessory Storage Box	= Change the Presser Foot	• To Change		the Needle
Extension	Table
		-_	f	f

I

o

\ \

\ \

To Remove the Extension Table (for free-arm sewing)

1.Grip the table with your index finger and thumb, as shown.

2.Pull gently to the left. The extension table will snap out.

To Attach the Extension Table (for flat-bed sewing)

1.Insert the tab and the pin into their catches.

2.With your thumb and index finger, gently snap in.

The

lid

of the accessory

storage

Use

the

correct

presser

foot

for

box

lifts

open toward

you.

the

stitch

you

wish

to

sew,

Sewing

accessories

are

conveni-

To change the various presser

ently located in the box.

feet, raise the presser bar to its

highest

position

by

lifting

the

presser

foot

lever.

Loosen the presser foot thumb

screw, choose the proper foot,

insert

from

the

bottom.

Tighten

the

screw

using

the

large

screw

driver

to

make

certain the foot is secure.

Needle clamp screw

Flat side

away from

you

J

NOTE: Raise the needle bar to its highest

position by turning the hand wheel toward you

1. Loosen the needle clamp screw by turning it toward you.

2.Remove the needle by pulling it down- ward.

3.Insert the new needle into the needle clamp with the flat side away from you.

4.Push the needle up as far as it will go.

5.Tighten the needle clamp screw firm y

with the large screwdriver from the accessor y box.