Kenmore 14501 Attach th.e spool pins, Put thread on the spool pin, Convert to free-arm sewing

i

B

Attach th.e spool pins

1.Check the accessory box for two spool pins.

2.Attach the spool pins at the rear of your machine, using the large screw driver.

Put thread on the spool pin

1.a. Swing the spool pin away from you and fully to the back of the machine.

b.Place a spool of thread on the spool pin.

Secure it with a suitable size spool cap

which is similar to the size of the spool, to ensure smooth flow of thread.

NOTE: Remember to return the spool pin under the arm for storage.

2.Attach the extra spool pin on the right end of the carrying handle, when sewing with a double needle (see page 6).

Convert to free-arm sewing

Your machine has a free arm for sewing sleeves, pant legs, etc. For free-arm sewing, you need to remove the extension table as follows:

1.Remove the extension table by pulling it to the left.

NOTE: Here are some of the uses of this free-arm feature:

A* mend elbows and knees of garmeRts *sew in sleeves, especially on small

garments

*applique, embroider, hem around edges of cuffs or pant legs

*sew in elastic casings in skirts or pants at the waistline

2.For all other sewing, slide the table along the free arm until the pins (A and B) fit into the holes on the machine.

8