Kenmore 1230, 1240, 1250 manual If,,,,, i,i ¸ Fig3, Threading of TOP Thread

THREADING OF TOP THREAD

Fig 1

Fig 2

_if,,,,,_ _i_,i ¸ •

Fig3 " '" "i,,,, __

y

1.Place thread on spool pin as shown, with the thread coming from the back of the spool (Fig. 1-O). Draw thread

through the top thread guide(s)(Fig.

1-_or (_).

2.Holding the spool with the right hand, pull the thread through the tension discs. The spring wire loop should be pulled up until the thread passes beyond the beak of the hook. Fig. 2.

3.After the thread has slipped into the hook, allow the spring wire to return to position by releasing the thread spool. Fig. 3.

4.Continue threading through the front thread guide, hook thread into take up lever and down through path shown in Fig. 4 and 5.

5.Always thread needle in direction as shown in Fig. 5.