Kenmore 1232 manual Ii!ii

:!ii!_ii!!

Fig. I

Fig 2

The light and power switch shown in Fig. 1 provides the electric current for'

the motor as wetl as the light In order to operate the machine, this switch must be on,

To turn on the light, depress the switch,, If you are interrupted while sewing and must leave the machine un- attended, just turn off the switch and the machine cannot be started ac- cidentally,

The sewing light is located in the face cover as shown,, To replace the bulb, turn the light off and open the face cover,. Push the bulb up and turn the bulb counter-clockwise and remove it from the socket

Push a new butb in and turn it clockwise,

NOTE:

First, unplug the machine prior to re- moving and replacing the bulb Be

aware that the light bulb may be warm