Pickingupbobbinthread

Rinse presser foot lever.

Hold needle thread loosely in left hand and rotate hand wheel toward you one complete turn.

Bring bobbin thread up by pulling upper thread (See illustration).

Place threads back under presser foot.

ADJUSTINGTHEPRESSURE

OFTHEPRESSERFOOT

Push down outer ring of presser foot pressure regulator

_See illustration). This will release pressure of presser foot. To increase pressure, push down inner pin until suitable pressure is obtained.

For ordinary sewing, the inner pin should be about half

way down. When sewing multiple thickness or heavy matenat, reduce the pressure. Increase it when sewing sheer fabncs.

Insufficzent pressure may cause skipped stitches or difficulty in guiding the fabric. If feed dog or presser foot marks appear on the fabric, reduce the pressure.