Pfaff Embroidery Machine manual Getting started embroidering

Page 5

Getting started embroidering

1.After attaching the embroidery unit and embroidery foot, insert a bobbin with lightweight bobbin thread.

Note: Make sure that the IDT is disengaged.

2.Hoop a piece of fabric and slide on the hoop.

3.Open selection menu (A) to select a design. Touch it once to load to embroidery edit.

4.The machine automatically switches to embroidery edit. The design is placed in the center of the hoop.

5.Switch from embroidery edit to embroidery stitch-out by touching the embroidery toggle icon (B) on the task bar.

6.Thread the machine with the first color in the color list (C).

B A

B

Embroidery Mode - Preparations

C

7:5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Embroidery preparations Built-in designs Embroidery unit overviewRemove the embroidery unit Creative vision Embroidery collectionConnect the embroidery unit Slide on the hoop To hoop the fabricGetting started embroidering Embroidery Mode Preparations
Top Page Image Contents