Pfaff 1014, 1019, 1015, 1037 Inserting Bobbin case, Release, Bobbin Thread, Both threads toward

Inserting the				bobbin case
Pull	up latch			P	and	push the		bobbin	case
onto	stud 0 as				far as it will		go. Cutout N
must	point		upwards.			Release		the latch.
Stud	0 and		latch P			must be		flush.
Replace		cover			108 or close		free arm		cover
122.

Drawing				up the		bobbin			thread
Hold		the needle				thread		a	little taut.		Turn
hand		wheel			102	toward		you until the needle
moves			down and up				again			and the take-up
lever		is	up.		Pull	the	bobbin			thread	out of
the	needle				hole	and	lay	both threads toward
the	left		and		back under			the sewing			foot.

8