Chicago Electric 90715 manual Operating Instructions, Controls and Indicators

OPERATING INSTRUCTIONS

Controls and Indicators

1.	Bobbin Winding Assy. – Winds the thread onto the bobbin to be used for the
	lower thread
2.	Spool Holder – Holds the sewing thread
3.	Stitch Length Dial – Controls the length of the stitches
4.	Presser Foot Lever – Raises and lowers the presser foot
5.	Upper Tension Control Dial – Controls the tension of the upper thread
6.	Extension Table and Accessories Compartment – Converts from the free-arm
	into a flat bed machine
7.	Mechanical Pattern Indication Window – Shows the stitch to be performed
8.	Reverse Sewing Button – Push for stitching in the reverse direction
9.	Balance Wheel – Turn toward you (counterclockwise) to raise and lower the
	needle
10.	Clutch Release Switch – Switches from bobbin winding mode to sewing mode
11.	Pattern Selection Dial – Turn in either direction to select the desired stitch
	(1)
12.
	Foot Controller Receptacle – Receives the foot controller plug
13.	Foot Controller – Used to control sewing speed, start and stop
14.	Main Power Switch – Turns the machine power on and off
15.	Vertical Spool Holder – Used to hold a second spool of thread for twin needle
	sewing

SKU 90715 Page 10