Pella 80YW0102 Frame until it is removed, MfyjcmfCbsct PdlIboemfTmpu, $PwfsTvqqpsuCsbdlfu

Page 5

" /*/(

$"4&.&/5

 5RWDWHWKHFRYHUHQGVOLJKWO\WRZDUGWKHLQWHULRUZKHQWKH cover begins to pull away from the frame, relocate the tool under the cover towards the interior as shown, then pull the tool away from the frame to continue the release of the cover barbs from the frame.

 5HSRVLWLRQWKHWRROZLWKWKHKRRNXQGHUWKHIURQWHGJH of the cover. Slide the tool over while pulling the cover away from the frame. This will release the flexible barbs on the interior side of the cover, which will aid in cover removal. Continue sliding along the length of the cover while pulling it away from the

frame until it is removed.

 5HSHDW6WHSV%WKUX%WR remove the other Interior )UDPH&RYHU

If installing a single Casement,

 

Large Awning or Fixed unit less

#

than 42" in width, go to Step E.

 

#

'MFYJCMFCBSCT

#

-PDLIBOEMFTMPU

If installing a Standard Awning, multiple window combinations, or units greater than 42" in width, go to Step C.

C.Remove Interior Frame Cover #2.

The cover on vent units where the crank handle and roto-cover will be located.

For Standard Awning, single units greater than 42" in height and multiple window combinations.

 6WDUWLQJDWWKHFRYHUHQG closest to where the crank handle will be located, insert the tool between the sash and FRYHU XVLQJWKHVDPHPHWKRG of insertion used for Interior )UDPH&RYHUV 

Note: Insert the tool under Interior Frame Cover #2 next to the FRAME CORNER (C2).

$

$

 3XOOWKHWRRODZD\IURPWKHIUDPHWRVWDUWUHOHDVLQJWKHFRYHUEDUEVIURPWKHIUDPHNHUIV

 :KHQWKHFRYHUEHJLQVWRSXOODZD\IURPWKHIUDPHUHORFDWHWKHWRROQHDUWKHHQGRI the cover as shown and continue to pull up to release the barbs from the kerfs.

4.When the cover has been released near the crank handle cut-out, reposition the tool with the hook under the front edge of the cover. Slide the tool over while pulling up on the cover. Continue along the length of the cover until it is removed.

Note: Take note of the cover support bracket around the roto operator hardware, (on the sill of casement and large awning units and on the jamb of standard awning units) as the cover support bracket will be referenced when re-installing Interior Frame Cover #2.

$

$ /05&

$PWFSTVQQPSUCSBDLFU

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Equivalent high quality, multi-purpose sealant Pella Corporation Part Number 80YW0102RRGVFUHZV WRSHUZLQGRZ  6LGHFXWWHUVRemove the Existing Sash Window Preparation Awning and Casement only Opening PreparationIpmf #FOEJO5PPM 4QMJOFPMF PPL $POTUSVDUJPOBOEMF5PPM$SPTT4FDUJPOPG #BSCSFMFBTFE GSPNLFSG 5PPM $PWFS$PWFSTVQQPSUCSBDLFU Frame until it is removedMFYJCMFCBSCT PDLIBOEMFTMPU TWO or More People are Required for the Following Steps Sealing and Fastening the WindowCasement $BTFNFOU4JMMSingle-Hung Double-HungQMBUFVMMJPO VMMJPOQMBUF VMMJPOQMBUF6WDQGDUG$ZQLQJXQLWV  Re-install Interior Frame Covers$07&3 $07&3Exterior Seal Interior SealInsulate between new frame and the existing frame with For single-hung and double-hung unitsExterior Finish of Existing Frame Installing Roto Cover and CrankAwning and Casement only $IHZSRVVLELOLWLHVLQFOXGHBuilding Straight out toward the interiorFinish Care and Maintenance Important Notice

80YW0102 specifications

The Pella 80YW0102 is a standout window solution that embodies the ideal blend of aesthetics, performance, and advanced technology. Renowned for its energy efficiency, it meets the rigorous demands of modern homeowners who prioritize sustainability without compromising on style.

Key features of the Pella 80YW0102 include its robust frame construction, which is designed to withstand various weather conditions, ensuring longevity and reliability. The window is crafted from high-quality materials that resist fading, cracking, and warping, promoting durability that homeowners can trust.

One of the standout technologies incorporated in the Pella 80YW0102 is its InsulShield protection, providing enhanced energy efficiency. This multi-layer glazing system is engineered to minimize heat transfer, keeping homes comfortably cool in the summer and warm in the winter. Notably, the windows are available with Low-E insulating glass, which reflects infrared light while allowing visible light to enter, improving indoor comfort and reducing energy bills.

Another prominent feature is the advanced weatherstripping system, which serves as a critical barrier against air and water infiltration. This not only enhances energy efficiency but also helps maintain a home’s indoor climate, making it an excellent choice for homeowners in diverse environments.

The Pella 80YW0102 also boasts a sleek design that complements a variety of architectural styles. Whether for a contemporary home or a traditional abode, the window's clean lines and elegant profiles can elevate the overall aesthetic. It is available in a range of finishes, allowing for personalized customization that aligns with homeowners’ vision.

Additional characteristics include easy operation, as the window is designed for smooth opening and closing, enhancing accessibility and convenience. Safety features such as tamper-resistant locks provide peace of mind, ensuring that families feel secure in their living spaces.

Finally, the Pella 80YW0102 is environmentally friendly, reflecting the brand's commitment to sustainability. With its energy-efficient attributes and responsible manufacturing processes, this window not only enhances a home’s aesthetics but also contributes positively to the environment.

In summary, the Pella 80YW0102 is a superior choice for anyone seeking a combination of style, performance, and eco-friendliness in their home windows. Its advanced features and technologies set a standard in the industry, making it a worthy investment for the modern homeowner.
Top Page Image Contents