Harbor Freight Tools 91614 manual Assembly and Operation, Included

Page 4

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Assembly and Operation

Your Two Burner Propane Stove will require some simple assembly as described in the following steps. To assist you with assembly and operation please refer to the Operational Figures as well as the Assembly Diagram and Parts List located on the last pages of this manual.

1.Pull the Latches (6) up from the top and around to the bottom of the Stove-see Figure 1.

2.Make certain that the stove is on a flat, level surface capable of supporting the weight of the Stove and the items to be heated. Raise the Cover (1), then raise the Side Shields (2) on both sides of the Stove. Insert the tabs on the Cover (1) through the hole in the side of the Side Shields (2). Raise each Side Shield (2) completely into place so that the tab locks into place at the end of the groove.

Figure 1

Burner and Fuel

Jet Assembly (7)

Side Shield (2)

Latch (6)

Burner Control Knob (8)

Tube and Valve Adapter (4)

Figure 2

Attach to propane canister (not included)

Thread onto

StoveTube and Valve

Adapter (4)

3.Thread the Tube and Valve Adapter Assembly (4) onto the Stove-see Figure 2. Tighten securely by hand or using a wrench.

4.Make certain that both the Burner Control Knobs (8) are in the OFF position before attaching the propane canister (not included).

5.Attach the other end of the Tube and Valve Adapter (4) to the propane canister (not

included).

For technical questions, please call 1-800-444-3353.

 

SKU 91614

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents For technical questions and replacement parts, please call 91614Technical Specifications Safety Warnings and PrecautionsFor technical questions, please call ModelSerial No.Purchase DateCarbon Monoxide Inhalation Hazard Assembly and Operation IncludedIncreasing and Decreasing Heat/Flame to Burner Assembly Storing the Two Burner Propane Stove for TravelUnpacking Description QuantityAssembly Diagram

91614 specifications

Harbor Freight Tools is well-known for providing an extensive range of high-quality tools at affordable prices. One of the standout products in their lineup is the 91614, a versatile and practical tool, especially favored by DIY enthusiasts and professionals alike.

The Harbor Freight Tools 91614 is a powerful and efficient 20-gallon oil-lubricated air compressor. Designed to meet the demands of various pneumatic tools and applications, it strikes a balance between performance and portability. With a robust 2 HP motor, this compressor is capable of delivering adequate power for tasks ranging from inflating tires to powering impact wrenches and nail guns.

One of the essential features of the 91614 is its large 20-gallon tank, which allows for prolonged operation without frequent cycling. This not only enhances productivity but also helps maintain consistent pressure for tools that require a steady air supply. The unit boasts a maximum pressure of 125 PSI, making it suitable for most light to medium-duty tasks.

In terms of technology, the Harbor Freight Tools 91614 employs an oil-lubricated pump system that ensures longevity and smooth operation. The oil-lubricated design reduces friction between moving parts, thereby extending the lifespan of the compressor. Furthermore, the unit features a direct-drive motor, promoting reliable performance with fewer moving parts and maintenance requirements.

The portability of the 91614 is enhanced by its built-in wheels and handle, making it easy to move around the workshop or to job sites. The compact design helps in optimizing space without sacrificing capacity or functionality. Additionally, the compressor includes multiple air outlets, allowing users to operate several tools simultaneously, maximizing efficiency.

Safety features such as an automatic pressure release valve, thermal overload protection, and a durable protective casing ensure that the 91614 operates safely under various conditions. The clear sight glass allows users to check oil levels with ease, contributing to ongoing maintenance and reliable performance.

In summary, the Harbor Freight Tools 91614 is an excellent choice for anyone in need of a reliable air compressor. With its combination of a powerful motor, large tank capacity, durable design, and portability, it caters to both novice and experienced users alike. Whether you're tackling home improvement projects, automotive work, or various DIY tasks, the 91614 offers the performance needed to get the job done effectively.
Top Page Image Contents