England's Stove Works 55-TRPEP, 55-SHPEP, 25-EP operation manual Replacing Components

Page 39

REPLACING COMPONENTS

Convection Blower

1.Before beginning any component replacement, be certain the unit is unplugged and thoroughly cooled down.

2.Remove the right side panel as previously detailed in this manual on Page. 32 in the “Exhaust Blower Cleaning” section.

3.Detach the convection blower from the wiring harness before loosening the four screws which secure it to the convection shroud of the stove.

4.After loosening and removing the four screws which hold the blower to the stove, remove the blower from the stove.

5.Installation of the new blower is performed in reverse of removal; remember to reconnect the new blower to the wiring harness before reinstalling the side panel.

Combustion Blower

1.Before beginning any component replacement, be certain the unit is unplugged and thoroughly cooled down.

2.Remove the left side panel as previously detailed on pg. 32.

3.Disconnect the venting system from the exhaust blower, and disconnect the exhaust blower from the stove wiring harness. Loosen and remove the thermal sensor screw on the top of the exhaust blower outlet using a 5/16” wrench.

4.Loosen and remove all five screws which hold the exhaust blower to the exhaust blower tube. Once the screws have been removed, the blower can be lifted up and out of the stove.

5.Reinstallation is the exact opposite of the steps above; however be certain to check the condition of the exhaust blower gasket and replace if necessary.

Page 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents 25-EP 55-SHPEP 55-TRPEP Evolution Pellet StoveRetain for your files Table of Contents Introduction Heating Specifications SpecificationsInstallation Unit Clearances to Combustibles Installation Installation Approved Venting Method 1 Through the Wall Approved Venting Method 2 Through the Ceiling Approved Venting Method 3 Existing Chimney System Installation Outside AIR HOOK-UP Floor Protection PUT Your Fingers in the Hopper or Near the Rotating Auger Daily OperationPage Control Board Settings Error Codes OFF Power FailureThermostat Operation Thermostat Operation Daily Maintenance Daily Maintenance Daily Maintenance Biweekly Maintenance Biweekly Maintenance Monthly Maintenance Monthly Maintenance Monthly Maintenance Soot and Fly Ash Formation and Need for Removal Yearly MaintenanceYearly Maintenance Page Yearly Maintenance Yearly Maintenance Trouble­Shooting Guide ‐1 Code On Control Board Replacing Components Replacing Components Replacing Components Replacing Components Recommended Heat Ranges Wiring Diagram Standard Accessories Optional AccessoriesIllustrated Parts Diagram Replacement Parts List Limited Five 5 Year Warranty Warranty is not transferable Warranty Registration for England’s Stove Works Important Notice

55-TRPEP, 25-EP, 55-SHPEP specifications

England's Stove Works is known for producing high-quality, efficient, and durable wood-burning appliances. Among their impressive lineup, the 55-SHPEP, 25-EP, and 55-TRPEP models stand out for their performance and innovative features.

The England's Stove Works 55-SHPEP is designed with efficiency in mind, boasting a large firebox that allows for extended burn times on a single load of wood. This model is known for its ability to heat spaces effectively, making it ideal for larger homes or open-concept areas. Its EPA-certified design ensures that it meets stringent emissions standards, making it an environmentally friendly choice. The 55-SHPEP also includes a convenient ash pan for easy cleanup and maintenance, adding to its user-friendly design.

Next, the 25-EP is an exceptional smaller option that still packs a punch in terms of heating capability. This stove is perfect for smaller rooms or cabins and features a compact design without sacrificing efficiency. The 25-EP offers a traditional aesthetic, complete with a large viewing window that showcases the enchanting flames. Its portable design allows for easy installation, and like the 55-SHPEP, it is EPA-certified for high efficiency and low emissions. This model is perfect for those seeking an affordable yet effective wood stove that can fit snugly into more confined spaces.

Lastly, the 55-TRPEP model integrates modern technology with classic design elements. This model features a unique advanced technology that maximizes heat output while minimizing emissions, making it an excellent eco-friendly choice. The 55-TRPEP includes a built-in blower that enhances heat distribution throughout the room, ensuring consistent warmth. It offers a high heating capacity, capable of warming larger spaces effectively, while maintaining a traditional wood-stove aesthetic.

All three models from England's Stove Works showcase their commitment to efficiency, durability, and modern design. Users can expect high-quality construction, stylish appearances, and environmental responsibility with each of these wood-burning appliances. Whether it’s the larger 55-SHPEP or the compact 25-EP, England’s Stove Works has options catered to diverse preferences and heating needs, making them a reliable choice for wood stove enthusiasts.
Top Page Image Contents