Installation Instructions | Harman Stove Company III specification

B.Burns Three Sizes of Anthracite - You can burn pea, nut or stove coal with these stoves.

C.Exterior Shaker-Lever - For greater safety (from getting burned) and greater convenience (no need for sep- arate tools).

IMPORTANT! WHEN SHAKING IS COMPLETED, TURN THE SHAKER UNTIL THE GRATES ARE FLAT AND HORIZONTAL. KEEP ASH DRAWER EMPTY!

6.Installation Instructions

6.1Unpacking and Inspection of Parts

Inspect the unit for visible damage. Stove parts and accessories are pack- aged inside the stove. It is recommend- ed that the owner remove these parts prior to proceeding with the installation to avoid parts damage.

NOTE: The doors, grates, and firebrick can be easily removed to lighten the weight prior to moving and placing the stove.

6.2Warnings

All stoves must be installed in accordance with state and local build- ing codes.

6.3Locating The Stove

Locate the stove as close to the chimney or flue as possible.

Locate stove where there is suffi- cient air supply for ventilation and prop- er combustion to comply with the mini- mum clearance required for fire protec- tion and accessibility.

6.4General Information

Installation Checklist:

A.Have only a qualified stove installer install the stove.

B.Before starting installation, check for proper clearance to combustibles and where the stove will be located.

C.Chimney - Have chimney inspect- ed for:

1.Proper type, Class “A” only, masonry or all-fuel factory-built.

2.Good physical and mechanical condition.

3.If manufactured chimney, look for listing mark and installation in accor- dance with manufacturer installation instructions.

4.Multiple venting should be avoided wherever possible. Never install your stove into the same vent as a gas furnace.

5.Check for proper roof clear- ances. See pg. 3 and check your local codes.

6.Chimney must be two feet higher than anything ten feet around it.

D.Flue Pipe

1.Chimney should be within 8 feet of the stove.

2.No more than two 90 degree elbows should be used.

E.Check for Proper Draft

The chimney used must be capa-

ble of providing a minimum of .06 inch- es water column draft.

F.A Barometric Draft Regulator

May be used and set at .06 to .10 inches water column.

Safety and Service Clearances - Regardless if you use your stove as a separate independent stove installation or in the parallel configuration with another furnace, the following steps will apply in your decision as to where and how you will install your new solid fuel stove.

Clearance to combustibles

Safe stove clearance to com- bustible walls is 24" to rear and 33" to sides and front. Floor protection for a combustible floor should consist of a non-asbestos stove mat with a K Factor of .84. The floor protector should extend 8" to either side and 16" in front of the stove. Floor protection should also extend 2" to either side of chimney connector.

IMPORTANT! THE FLUE PIPE MUST BE 24 GAUGE OR THICKER.

When connecting the flue pipe to the stove the first section of the pipe

I, III, II specifications

Harman Stove Company, a well-respected name in the heating industry, has been providing reliable and efficient heating solutions for more than four decades. Known for their innovative designs and commitment to quality, Harman offers a range of stoves that cater to diverse heating needs. Among their most popular models are Harman Stove Company I, II, and III, each boasting unique features and advanced technologies.

Harman Stove Company I is recognized for its compact design and efficiency, making it an ideal choice for smaller spaces. This stove is equipped with Harman’s patented Automatic Ignition System, which ensures easy and reliable start-ups, even in the coldest weather. With a heat output capacity that is suitable for a moderate area, the stove combines functionality with style, featuring a sleek and contemporary look that fits into various home decors. The Harman I also emphasizes user-friendly controls, allowing homeowners to adjust settings easily.

The Harman Stove Company II enhances the foundation laid by its predecessor by offering increased heating performance and fuel flexibility. This model is designed to burn both wood pellets and corn, providing homeowners with versatile options depending on fuel availability and price. The innovative Heat Management System ensures that the heat is evenly distributed throughout the room, promoting comfort and warmth. Additionally, the stove features a large viewing window, showcasing the beautiful flames and adding an inviting atmosphere to any space. The Harman II also includes a built-in diagnostics system, which monitors performance and alerts users to any potential issues.

Finally, the Harman Stove Company III represents the pinnacle of their product line, characterized by its robust construction and high-efficiency ratings. This stove is designed for larger spaces, offering substantial heat output without compromising on energy efficiency. The Harman III includes advanced technologies, such as the Smart Control System, allowing for precision temperature management and programmable settings. It features a unique airflow design, which maximizes combustion efficiency while minimizing emissions, making it an eco-friendly option. With an impressive warranty and high-quality materials, the Harman III is built to last and provide reliable heating for years.

In summary, the Harman Stove Company I, II, and III represent a commitment to innovation, efficiency, and reliability in home heating solutions. Each model caters to different needs and preferences, ensuring that there is a Harman stove for everyone. With advanced technologies and user-friendly features, Harman continues to set the standard in the pellet and wood stove market.