Installation, Installing | Harman Stove Company P61 manual

Installation

Installing

Place the stove on a non-combustible floor or a floor protector providing a minimum .84k value. Floor protection must extend 6 inches to the front, 6 inches to the sides and 1 inch to the rear of the stove.

Place the stove away from combustible walls at least as far as shown in figures 3,4 and 5. Please note the difference in side wall clearance with and without side shields.

Note that the clearances shown are minimum for safety but do not leave much room for access when cleaning or servicing. Please take this into account when placing the stove.

Connect the power cord to a 120 V.A.C. 60Hz grounded receptacle.

After connecting the flue system, perform the second draft test. However, prior to taking the draft reading be sure all doors and windows in the home are closed. Record the draft reading_______. If this reading is more than .05"

lower than the unconnected reading, check for possible restrictions or the need for outside air (see page 7).

Mobile Home Installation

When installing this unit in a mobile home, several requirements must be followed:

1.The unit must be bolted to the floor. This can be done with

1/4" lag screws through the 2 holes in the base plate.

2.The unit must also be connected for the outside air. See page 7.

3.Floor protection and clearances must be followed as shown.

4.Unit must be grounded to the metal frame of the mobile home.

5.The stove may not be installed in a room designated for sleeping.

CAUTION: This appliance must be vented to the outside.

Due to high temperatures, the stove should be placed out of traffic and away from furniture and draperies. Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burn to skin and/or clothing.

Young children should be carefully supervised when they are in the same room as the stove.

Clothing and other flammable materials should not be placed on or near this unit.

Installation and repair of this Harman Stove should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning will be required. It is imperative that control compartments, burners, and circulating air passageways of the stove be kept clean.

Mobile home installation should be done in accordance with the Manufactured Home and Safety Standard (HUD), CFR 3280, Part 24.

9"-13"

9" With Side Shields	Fig. 3
13" Without Side Shields

Fig. 4

18"

Fig. 5

P61 specifications

The Harman Stove Company P61 is a notable addition to the realm of pellet stoves, featuring advanced technology and a user-centric design. This powerful heating solution is ideal for homeowners looking for both efficiency and comfort, combining functionality with an elegant aesthetic that suits various interior styles.

One of the P61's standout features is its high efficiency rating, achieving over 85% combustion efficiency. This means that it utilizes fuel effectively, maximizing heat output while minimizing waste and emissions. Each pellet produces a significant amount of heat, making the P61 an economical choice for heating larger spaces.

The P61 boasts an impressive heat output, with a maximum of 61,000 BTUs, allowing it to heat areas of up to 2,500 square feet. With adjustable settings, users can easily customize the heat level to their specific preferences and needs, ensuring optimal comfort throughout the winter months. The stove also features a large hopper capacity, typically around 55 pounds, allowing for extended burn times and reducing the frequency of refueling.

Incorporating Harman's renowned Smart Control technology, the P61 comes equipped with a user-friendly digital control board. This advanced technology enables precise temperature control and can be easily configured to set specific heating schedules. Furthermore, the stove's integrated diagnostic system allows for quick troubleshooting, ensuring a hassle-free operation.

The design of the P61 allows for versatile installation options, accommodating both direct vent and optional chimney installation, which enhances its adaptability to various home settings. Additionally, the stove's aesthetics are noteworthy. It features a sleek, modern design, with several finish options, ensuring it can seamlessly blend with any home decor.

Durability is another key characteristic of the P61. Constructed with high-quality materials such as heavy-duty steel and a robust firebox, this stove is built to withstand the rigors of daily use while providing long-lasting performance. The easy-clean vertical flue design further facilitates maintenance, ensuring that users can enjoy optimal performance without significant effort.

Overall, the Harman Stove Company P61 stands out in the pellet stove market, thanks to its combination of efficiency, advanced technology, user-friendly features, and stylish design. Whether one seeks a reliable heating source or a centerpiece for their living space, the P61 delivers on all fronts, making it a worthy investment for home heating solutions.