Harman Stove Company MARK III manual Venting & Grates, Grate System and Controls

Page 8

Venting & Grates

E) Improperly sized flue - Too small of a chimney is

 

4. Grates

incapable of moving the volume of air necessary. Too

 

large of a flue could have trouble warming up to cre-

 

4.1 GRATE SYSTEM AND CONTROLS.

 

The Grates are made of heavy-duty cast iron. The

ate the necessary upward flow.

 

 

function of the grate system is to support the coal

F) Chimney offsets - Offset chimneys should be

 

 

while allowing air flow through the fire. The grate sys-

avoided if possible. Not only can the offset affect draft,

tem also allows removal of the ashes by shaking them

it is also a place for debris to collect over time.

 

 

through the grates.

G) Too many elbows - The flue connector has more

 

 

The grates are removable without the use of tools,

than two elbows in it. Sometimes, depending on

 

 

once the fire bricks are removed, the grates simply

overall chimney performance, one elbow could be too

 

 

lift out. Lift the right end higher to disengage from the

many.

 

 

shaking link. To re-install the grates, lower them, one

H) Vent sharing - No more than one heating appliance

at a time, left end first, be sure the grate hooks into

shall vent into a single flue.

 

 

the grate link as you drop it into place.

 

 

 

 

 

 

 

THE MOST IMPORTANT THING TO REMEMBER

 

 

Stove body

ABOUT CHIMNEYS IS THEIR NEED FOR MAIN-

 

 

 

 

 

 

TENANCE AND CLEANING. IF A CHIMNEY IS NOT

 

 

 

 

 

 

CLEANED ON A FREQUENT BASIS, IT WILL AF-

 

 

 

 

 

 

FECT DRAFT, AS WELL AS BE A CONTRIBUTING

 

 

 

 

 

Grates

FACTOR TO A POTENTIAL CHIMNEY FIRE.

 

 

 

 

 

 

 

 

 

 

 

3.3 what to do if you have a problem.

 

 

 

 

Grate Link

If you have a chimney fire:

 

Shaker Handle

1. Be sure everyone is out of the house.

 

 

 

 

 

 

 

2. Call the fire department.

 

 

 

 

 

 

3. Close the draft control on the ash door and

 

 

Shaker Bar

make sure both doors on the stove are closed

 

 

 

 

 

 

 

 

 

 

 

 

and latched.

 

Your grates will last forever, as long as you keep your

4. Do not put water on the fire, this will cause un-

 

ashes cleaned out of the stove. When ashes are left

necessary damage to the stove and flue.

 

pile-up against the grates, the air-flow is blocked. With

5. Have the chimney inspected and repaired prior

 

no air flow through the grates, they will begin to sag

to building another fire.

 

from the intense heat.

Smoke puffs out of stove;

 

The grates are designed to accommodate three differ-

 

ent sizes of anthracite coal. Pea is defined as being

A) Check previous suggestions for insufficient draft.

 

able to fit through a round screen hole of 9/16” to 7/8”.

B) Check draft control for proper operation.

Nut or Chestnut is defined as being able to fit through

C) Chimney may be too low. Increase height.

a round screen hole of 7/8” to 1½”. Finally , Stove coal

D) Add more fresh air to the room. Your home may be

which is 1½” to 2½” in size. Pea or Nut you’ll find work

so tight that there is not enough oxygen getting to the

the best for starting a fire, while all three sizes burn

fire.

just as well.

E) Remember, open the draft control and crack the

The external shaker handle allows for greater safety

door open slightly before reloading or checking the

from burns, and the convenience of needing no extra

fire.

tools.

F) Check the ashes. The ash pan and firebox may be

 

overloaded with ashes.

 

G) Check the chimney cleanout door to ensure it

 

closes properly.

 

8

Magnafire Series Coal Stoves

Image 8
Contents Installation and Operating Manual Magnafire Series Coal Stoves Mark I, II,Page Safety Notice IntroductionIndex VentingAssembly & Installation InstallationSafety Considerations Assembly Common chimney problems VentingVenting & Chimneys Types of ChimneysGrate System and Controls Venting & GratesGrates Operation Operating InstructionsStarting a Fire LoadingMaintenance MaintenanceSafety Periodic and Everyday MaintenanceOptional Hot Water Coil Plumbing DiagramsOptional Water Coil Thermo- Siphon Method Circulating Pump MethodWarranty Period Warranty InformationWarranty Coverage Warranty Conditions Warranty ExclusionsThis warranty is void if Limitations of LiabilityService Parts Service PartsStocked At DepotService Parts Mark Stocked at DepotStocked Stocked at Depot At Depot Service & Maintenance Log Service & Maintenance Log Page Proudly Printed On 100% Recycled Paper
Related manuals
Manual 24 pages 24.75 Kb

MARK II, MARK I, MARK III specifications

Harman Stove Company has established itself as a leader in the production of high-quality wood and pellet stoves. The MARK III, MARK I, and MARK II series represent some of the finest offerings from this esteemed company, showcasing impressive features, innovative technologies, and unique characteristics that cater to a variety of heating needs.

The Harman MARK III is renowned for its robust construction, offering a substantial heat output that can effectively warm larger spaces. One of its standout features is the patented "Smart Heat" technology, which ensures optimal fuel efficiency and consistent heat distribution. The MARK III incorporates a large combustion chamber, capable of accommodating various types of pellets or wood, which enhances its versatility. Additionally, the unit's automatic ignition system simplifies operation, allowing users to easily start a fire with the push of a button. The intense heat produced is further complemented by a sleek design that fits seamlessly into any decor.

The Harman MARK I is designed for those seeking a compact but powerful heating solution. Despite its smaller size, this stove is engineered for maximum efficiency with an efficient burn rate that translates to lower emissions and reduced environmental impact. It features a ceramic glass door that provides a pleasing view of the fire while retaining heat. The MARK I also includes Harman's advanced feed system that ensures steady fuel delivery, optimizing performance and reducing the need for frequent refueling. This model is perfect for small homes or cabins, where space is at a premium but warmth is essential.

The MARK II combines the best of both worlds, offering a balance between size and output. This model incorporates advanced airflow technologies that enhance combustion efficiency and minimize soot buildup. Its flexible installation options make it suitable for a variety of spaces, and its user-friendly digital control panel allows for effortless adjustments to temperature settings. Like its counterparts, the MARK II ensures a clean burn, contributing to improved air quality.

Overall, the MARK series from Harman Stove Company showcases the commitment to delivering reliable, efficient, and aesthetically pleasing heating solutions. With advanced technologies, user-centric designs, and exceptional performance, each model provides a unique blend of features that cater to diverse heating needs, ensuring a cozy and comfortable environment for any home.