Operating Instructions

7.NOTE: The propane tank used must be constructed and marked in accordance with the specifications for LP propane cylinders by the U.S. Department of Transportation. (See Figure A.)

8.To connect to the propane tank, first make sure the Temperature Control Knob

(4) of the Propane Stove is in its “OFF” position. Wrap the male threads of the propane tank’s discharge pipe with about 4 inches of pipe thread seal tape.

Then, screw the Gas Valve of the LP Regulator & Hose Kit firmly onto the propane tank’s discharge pipe (wrench tighten). (See Figure A.)

1. CAUTION! Always use clean equipment and utensils. Before using the Propane Stove, and after using this product, clean all parts in warm, clean water and anti-bacterial soap. Then, thoroughly dry.

2.NOTE: Higher altitudes may affect cooking efficiency of the Propane Stove.

3.Make sure the Propane Stove and propane tank are located on a clean, dry, level surface capable of supporting the weight of the Stove and propane tank. Keep the Propane Stove and propane tank away from other flammable objects.

4.Check to make sure the Temperature Control Knob (4) on the Propane Stove is in its “OFF” position. Open the gas valve on the propane tank and check and smell for gas leaks. Perform a bubble test by applying warm soapy water over every joint, regulator, fitting, and anywhere else there may be a possible leak. Observe carefully to see if bubbles expand, indicating a leak. A large leak can blow the soapy solution away instead of forming bubbles. If leaks are found, do not use the Propane Stove until the leaks have been stopped. After testing, make sure to close the gas valve on the propane tank.

5.For manual ignition models, open the gas valve on the propane tank. Apply a lighted match to the Burner (2) which is to be lit. Next, push the Temperature Control Knob (4) and turn it to its “ON” position. Once the Burner is lit, safely dispose of the match and adjust the Temperature Control Knob to the desired setting. (See Assy. Diagram.)

6.For Piezo Electric ignition models, a Burner (2) can be lit by pushing and turning the Temperature Control Knob (4) to its “ON” position without having to use a match. Once the Burner is lit, adjust the Temperature Control Knob to the desired setting. NOTE: If the Burner does not light up, turn the Temperature Control Knob to its “OFF” position and wait 5 minutes before trying again.

(See Assy. Diagram.)

35558

SKU 3555935560For technical questions, please call 1-800-444-3353 PAGE 7

35561

35559, 35560, 35561, 35558 specifications

Harbor Freight Tools is a renowned retailer known for providing high-quality tools at competitive prices. Among their diverse range of products, the models 35558, 35561, 35560, and 35559 stand out due to their unique features and exceptional performance.

The Harbor Freight Tools 35558 is a versatile electric winch designed for a variety of hauling tasks. With a robust 2500 lb. pulling capacity, it's perfect for off-road applications, and can easily handle heavy loads with precision. This model features a 1.5 HP motor, ensuring powerful performance while maintaining energy efficiency. The automatic braking system enhances safety during operation, allowing for smooth and controlled lowering. Its weather-resistant construction ensures durability, making it suitable for outdoor use in harsh conditions.

Next, the model 35561 is a heavy-duty 7-inch electric angle grinder that serves both professionals and DIY enthusiasts. Equipped with a powerful 11-amp motor, it delivers fast and efficient cutting and grinding performance. The adjustable guard provides safety during use, and the side handle allows for improved control and comfort. With its lightweight design and built-in anti-vibration technology, this angle grinder minimizes fatigue, enabling extended use without discomfort. Additionally, it supports various disc attachments, offering versatility for different applications.

The Harbor Freight Tools 35560 serves as a compact yet powerful portable generator. With a peak output of 3500 watts and a continuous output of 3000 watts, it’s ideal for emergency backup power as well as outdoor recreational use. The generator is equipped with a reliable 4-stroke engine, providing quiet operation and reduced emissions, in line with modern environmental standards. Its integrated wheels and handle make transportation a breeze, while the multiple outlets ensure compatibility with a wide range of devices.

Finally, model 35559 presents a robust 2-ton capacity foldable shop crane. This crane is built from high-strength materials, ensuring stability and durability during lifting operations. Its hydraulic system allows for precise control while lifting heavy items, and the entire unit folds for easy storage. The adjustable boom provides added versatility, making it an essential tool for any garage or shop setting.

Overall, the Harbor Freight Tools 35558, 35561, 35560, and 35559 exemplify quality and innovation. Whether looking for powerful lifting solutions, reliable power sources, or versatile grinding tools, these models meet and exceed the expectations of customers, making Harbor Freight a go-to for tools and equipment.