Installation Instructions

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Open, fold down and remove the detachable front panel, if it is attached to the chassis, by grasping the grooved center portion and pulling the panel assembly straight out. Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or

file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be“on”). If unit does not operate, re-check all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 5 MM MAXIMUM SCREW SIZE. LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

-2-

P-49 specifications

The Nokia P-49 represents a significant breakthrough in smartphone technology, combining innovative features with powerful performance tailored for modern users. As the latest addition to Nokia's acclaimed P-series, the P-49 is designed to meet the demands of both tech-savvy individuals and casual users alike.

One of the standout features of the Nokia P-49 is its stunning 6.5-inch AMOLED display, which offers vibrant colors and deep contrasts, making it perfect for media consumption. With a resolution of 2400 x 1080 pixels, users can enjoy crisp images and smooth text, whether they are watching videos, playing games, or browsing the internet. The edge-to-edge design not only enhances viewing angles but also adds a touch of elegance.

The smartphone is powered by Qualcomm's latest Snapdragon processor, ensuring lightning-fast performance and efficient multitasking capabilities. Coupled with 8GB of RAM, the Nokia P-49 handles demanding applications and gaming with ease, providing a seamless user experience. The device also comes with up to 256GB of internal storage, expandable via microSD, allowing users ample space for their apps, photos, and videos.

Photography enthusiasts will appreciate the advanced camera system on the P-49. The device features a triple-lens setup on the rear, including a 108MP main sensor, an ultra-wide lens, and a depth sensor, providing users with a versatile toolkit for capturing stunning images. The AI-enhanced photography capabilities ensure optimal results in various lighting conditions, while features such as optical zoom and portrait mode further elevate the photography experience.

Battery life is another area where the Nokia P-49 excels. With a robust 5000mAh battery, users can enjoy extended usage without the need for frequent recharging. The device also supports fast charging, allowing users to quickly power up their device when needed. Additionally, the Nokia P-49 includes 5G connectivity, enabling users to harness the power of next-generation networks for faster downloads and streaming.

The Nokia P-49 also takes security seriously, featuring an in-display fingerprint sensor for easy and secure access. The device runs on a clean version of Android, ensuring regular updates and a user-friendly interface. With its combination of design, power, and features, the Nokia P-49 is poised to be a major player in the highly competitive smartphone market, appealing to a wide range of users looking for cutting-edge technology in their handheld devices.