Cleaning the Glass

INSTALLATION AND OPERATION MANUAL

MF3500 Model

NORMAL CARE & MAINTENANCE

When the fire is first started, it will produce some smoke. The smoke might accumulate on the glass surface. Before the fire gets hot, open the door and wipe the glass surface off with a damp rag.

If after constant use, the glass might fill with ash deposits. You must clean the glass after the glass has cooled down. Do not touch the surface with your hands.Take a damp rag and wipe the glass clean. If this does not clean the glass use any non-abrasive liquid spray.

DISPOSAL OF ASHES

Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed on a noncombustible floor or on the ground, well away from all combustible materials, pending final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders have been thoroughly cooled.

REMOVAL OF CERAMIC GLASS

Open the door and lift off of hinges. If the door is tight, tap gently on the bottom of the door with your hand or rubber hammer. Lay door down on newspaper with glass clips facing you. Loosen the screws and take off the glass clips. Remove the broken glass carefully and discard.

Reverse the above procedure for replacing new glass with new gasket.

FUEL POT REMAINS

The “clinker” is the solid mass that remains unburned in the burner pot. It contains the inorganic parts of the fuel and is safe to use as fertilizer or dispose of in a proper container.

SOOT AND FLY ASH

The products of combustion will contain small particles of fly ash. The fly ash and soot will collect in the exhaust venting system and restrict the flow of flue gasses. Incomplete combustion, such as occurs during startup, shutdown, or incorrect operation of the parlor stove will lead to some soot formation which will collect in the exhaust venting system. The exhaust venting system should be inspected at least once per month (during heavy use) to determine if cleaning is necessary. Corn has a high ash content.

caution

Do not operate stove with broken glass. Do not slam THE door shut.

Do not strike glass.

Do not use abrasive cleaners. Do not clean HOT glass.

replace CERAMIC GLASS WITH factory Authorized REPLACEMENT PARTS ONLY.

tHE CLINKER WILL REMAIN HOT FOR SEVERAL MINUTES AFTER IT IS PULLED OUT OF THE BURNER POT.

Ash Pan Location

EXHAUST AND CONVECTION AIR FILTER

•Remove air filter and replace regularly

•Clean exhaust vent

Page 22

CumberlandStoveWorks.com

800-345-6007

MF3500 specifications

The Cumberland Stove Works MF3500 is a modern marvel in the realm of wood burning stoves, designed to provide efficient heating solutions while embracing contemporary aesthetics. This freestanding stove combines high performance with an array of advanced technologies, making it a preferred choice for both traditional and modern households.

One of the most notable features of the MF3500 is its impressive heating capacity. With the ability to adequately heat spaces up to 2,500 square feet, this stove is ideal for larger living areas or open-concept homes. Its powerful firebox is engineered for maximum combustion efficiency, allowing users to enjoy longer burn times with less wood, ultimately leading to reduced fuel consumption and lower heating costs.

The MF3500 also integrates cutting-edge air wash technology, which keeps the glass clean and clear for an unobstructed view of the flames. This feature not only enhances the overall ambiance of the room but also minimizes maintenance requirements, allowing users to spend more time enjoying the warmth and beauty of their stove and less time cleaning.

Durability and craftsmanship are hallmarks of the Cumberland Stove Works brand. The MF3500 is constructed from high-quality steel, designed to withstand the demands of consistent use while providing optimal heat retention and distribution. The firebox is lined with firebrick, which further enhances its longevity and performance. Moreover, the stove's sleek design, available in various finishes, allows it to blend seamlessly into any home décor.

The MF3500 is equipped with an efficient ash removal system, which simplifies the process of cleaning up after a fire. This practical feature ensures that users can easily manage the byproducts of combustion without hassle. Additionally, it complies with EPA certification standards, meaning it burns cleanly and efficiently, producing fewer emissions than many traditional wood stoves.

Another key characteristic of the MF3500 is its versatility in fuel options. While primarily designed for wood, it can also accommodate a range of biomass fuels, such as wood pellets or corn, catering to a spectrum of user preferences and available resources.

In summary, the Cumberland Stove Works MF3500 offers a superior blend of efficiency, aesthetic appeal, and user-centric design. With features like advanced combustion technology, exceptional heating capacity, and eco-friendly operation, it is a robust choice for anyone seeking an effective and stylish wood-burning stove that enhances home comfort and reduces environmental impact.