Frigidaire 2020266A0258 important safety instructions Operating Instructions

Page 4

Operating Instructions

Operating Instructions

Allow the unit to reach room temperature before operating.

To begin operating the dehumidifier, follow these steps:

NOTE:

Unit must be upright for one hour prior to operating.

1. Plug the power cord into a properly grounded 115 volt AC outlet.

NOTE:

If the "BUCKET FULL" light is on, remove the bucket and re-install to reset the float switch.

2.To turn the unit on, press the ON/OFF button. The unit will run in the factory setting of CONTINUOUS and high fan speed. In the CONTINUOUS mode, the unit will only display CO and not the room humidity. It is recommended you leave the unit running in the CONTINUOUS setting for the first three or four days until the sweating and dampness odors have stopped.

4

2009 Electrolux Home Products, Inc.

All rights reserved.

 

 

 

 

Image 4
Contents Use&Care Important Safety Instructions Location How It Works Location & How It Works Operating Instructions Operating InstructionsButton Fault Codes Removing Collected Water Operating Instructions, Care and Cleaning & Storage Care and CleaningOccurrence Solution Before You CallMajor Appliance Limited Warranty Exclusions This warranty does not cover the following