Graco 215963 Installation, Operation, Grounding, To ground the pump, Pressure Relief Procedure

Page 5

Installation

Grounding

Proper grounding is an essential part of maintaining a safe system.

To reduce the risk of static sparking, ground the pump. Check your local electrical code for detailed grounding instructions for your area and type of equipment. Be sure to ground all of this equipment:

DPump: Use a ground wire and clamp as shown in Fig. 1.

DAir compressor: Follow manufacturer’s recommen- dations.

DObject being sprayed: Follow your local code.

DAll solvent pails used when flushing or relieving pressure, always hold a metal part of the gun firmly to the side of a grounded metal pail, then trigger the gun.

DTo maintain grounding continuity when flushing or relieving pressure, always hold a metal part of the spray gun firmly to the side of a grounded metal pail, then trigger the spray gun.

To ground the pump:

1.UL–Listed Pumps: Use a ground wire, connector,

and clamp. See Fig. 1. Loosen screw (X). Insert one exposed end of a 12 ga (1.5 mm2) minimum ground wire (Y) through the eye of the ground terminal connector (W) and tighten screw (X) securely. Connect the other end of the wire to a true earth ground. Order Part No. 237569 Ground Wire and Clamp.

2.Non UL–Listed Pumps: See Fig. 1. Remove the ground screw (Z). Fasten the ground connector

(W) onto the pump with the ground screw (Z) and

tighten securely. Loosen screw (X). Insert one exposed end of a 12 ga (1.5 mm2) minimum ground wire (Y) through the eye of the ground terminal connector (W) and tighten screw (X) securely. Connect the other end of the wire to a true earth ground. Order Part No. 222011 Ground Connector/Wire and Clamp.

W

Z

Y

X

Fig. 1

TI1052

Operation

Pressure Relief Procedure

WARNING

INJECTION HAZARD

The system pressure must be manually relieved to prevent the system from starting or spraying accidentally. Fluid

under high pressure can be injected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or moving parts, follow the Pressure Relief Procedure whenever you:

Dare instructed to relieve the pressure,

Dstop spraying/dispensing,

Dcheck or service any of the system equipment,

Dor install or clean the spray tips or nozzles.

1.Shut off the air to the pump.

2.Close the bleed-type master air valve (required in your system).

3.Hold a metal part of the gun to the side of a grounded metal pail and trigger the gun to relieve pressure.

4.Open the fluid drain valve (required in your sys- tem), having a container ready to catch the drain- age.

5.Leave the drain valve open until you are ready to spray/dispense again.

If you suspect that the spray tip/nozzle or hose is clogged or that fluid pressure is not fully relieved after following the steps above, very slowly loosen the tip guard retaining nut or hose end coupling and relieve pressure gradually. Clear the tip or hose obstruction.

307456 5

Image 5
Contents Model 215963 Shown Instructions Parts ListModel 215963, Series a Symbols Table of ContentsSkin Injection Hazard Toxic Fluid Hazard Fire and Explosion HazardPressure Relief Procedure InstallationOperation GroundingProblem Solution TroubleshootingAir Piston and Lower Spring Service ServicePacking Replacement Upper Spring Replacement2023a 148 10† PartsMounting Hole Layout DimensionsTechnical Data Graco Information Graco Standard Warranty

215963 specifications

Graco 215963 is a highly efficient and versatile airless paint sprayer designed for both professionals and DIY enthusiasts. Built to handle a variety of painting tasks, this unit simplifies the process of achieving a smooth and uniform finish, whether it’s for large surfaces or detailed work. With its robust construction, ease of use, and innovative features, the Graco 215963 stands out in the market as a reliable option for those seeking to elevate their painting projects.

One of the main features of the Graco 215963 is its powerful motor that is capable of delivering consistent pressure, thus ensuring a steady flow of paint. This feature is essential for obtaining an even coat without the usual distractions of roller marks or brush strokes. The motor can handle a variety of paints and stains, making it suitable for a wide range of applications, from interior walls to outdoor surfaces.

The unit is equipped with Graco’s Reverse-A-Clean spray tip system, which allows users to quickly and easily clear clogs without disassembling the sprayer. This technology is a significant time-saver, especially during larger projects when interruptions can lead to inefficiencies. The sprayer also includes a professional-grade hose that is durable and flexible, allowing for greater maneuverability while painting.

Another notable characteristic of the Graco 215963 is its adjustable spray pressure. Users can easily customize the pressure settings according to the type of paint being used and the specific requirements of the surface being painted. This level of control enhances versatility, allowing painters to switch between different styles, such as fine finishes or heavier applications, with minimal effort.

Safety and comfort are also important considerations in the design of the Graco 215963. The unit comes with an ergonomic design that reduces fatigue during extended use, making it user-friendly for long projects. It also features a built-in stand and a compact design, allowing for easy transport and storage when not in use.

In summary, the Graco 215963 is a powerful airless paint sprayer that combines convenience, efficiency, and professional-quality performance. Its advanced features, including a strong motor, clog-resistant technology, adjustable pressure settings, and ergonomic design, make it suitable for a wide range of painting applications. Whether you are a seasoned contractor or a homeowner taking on a DIY project, the Graco 215963 is equipped to meet your painting needs with ease and precision.