Switch Housing
www.CasablancaFanCo.com
1.888.227.2178
Screw two housing assembly screws | Feed the wire plug through the center | Insert the third screw, found in | |||||
from the |
| hardware bag halfway into | hole of the upper switch housing, then | the |
|
| hardware bag, into place and |
|
| ||||||
|
| ||||||
the motor housing. It does not matter | wrap keyhole slots around the screws and |
| then tighten all three screws. | ||||
which two screw holes you choose. | twist counterclockwise. |
|
|
|
|
15
Make sure the upper switch housing is securely attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling.