Electric Power Connection, Installation

19.Check that neither the appliance nor the power cable have been damaged in any way dur- ing transportation.

20.CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully inserted. 21.Do not cover the appliance while it is functioning in order to avoid overheating with the

attendant risk of fire.

SAVE THESE INSTRUCTIONS

Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is an important safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.

Do not ignore the safety purpose of the polarized plug.

Voltage Wattage

See rating label

CAUTION

- This heater includes a thermal Cut-Off Overheat Protection System that shuts the unit off if it over- heats due to abnormal conditions. If this occurs, the Overheat Safety Light “red” will turn on. Turn the heater “Off”, unplug it, and inspect and remove any objects on or adjacent to the heater. Allow it to cool for a few minutes, plug it back in, and resume normal operation.

-Always use the heater in an upright position.

-Do not use the heater to dry your laundry. To prevent the danger of overheating, never obstruct the intake and outlet grilles.

-The appliance must be installed so that the switches and other controls cannot be reached from a person standing in a bathtub or a shower.

-The power cord must be replaced only by officially authorized personnel.

ELECTRIC POWER CONNECTION

This heater must be connected to a properly polarized AC 110/120 Volts household outlet in perfect working condition.

Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater is plugged in.

INSTALLATION

This fan heater can be easily positioned on any horizontal support surface in an upright position.

MANUAL OPERATION

Turn the timer knob to the “manual” position (on models equipped with timer only).

-Turning the heater ON: turn the function selector knob to setting , 1, or 2. The yellow pilot light will turn on.

-Summer ventilation setting: turn the function selector knob to setting . (The yellow pilot light will turn on).

-Minimum power setting (750W): turn the function selector knob to setting 1.

-Maximum power setting (1500W): turn the function selector knob to setting 2.

-Turning the heater OFF: turn the function selector knob to setting 0. The yellow pilot light will turn off.