HOW to USE Your Heater, Fitting the Wheels

HOW TO USE YOUR HEATER

FITTING THE WHEELS

Remove the feet and the wheels from the polystyrene packing. Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging the paint finish.

-Fit the wheels to the spindles on the feet and push firmly until they click into position. Pull each wheel to check that it is correctly inserted.

-The feet with the casters must be fitted with two arc-shaped brackets and fit them using the threaded bar and wing nut provided, only between the 1st and 2nd element and the second to last (see fig. 1 to 3 inclusive).

fig.1

fig.2

fig.3

CAUTION

Always operate the heater in upright position only (wheels on the bottom, controls on top). Any other position could create hazardous situation!

ON/OFF Switches

Power lights

600900

WATTS WATTS

TOTAL 1500 WATTS

HEAT SETTING

For more energy-efficent operation, the Min or Med settings may be used individually once the unit has reached the operating temperature.

The power lights indicate that the unit is in operation, and which heat setting is currently selected!