Electrical Connection, Installation, Maintenance

ELECTRICAL CONNECTION

Before using the appliance check that your supply voltage is the same of that shown on the rating label of the unit.

INSTALLATION

The appliance can be used on any horizontal surface.

Do not overload the electrical circuit. Avoid using the same socket for other appliances.

OPERATION AND USE

1.Make sure the appliance is off before plugging into the mains.

2.Plug the appliance, the pilot lamp will light on.

3.Turn the appliance on by placing the thermostat (C) in the Max position and the mode selector (A) in one of the following positions: 1/2.

-Summer operation (fan only): turn the mode selector to the position.

-Minimum power setting: turn the mode selector (A) to the "1" position.

-Maximum power setting: turn the mode selector (A) to the "2" position.

HOW TO TURN THE APPLIANCE OFF

To turn the appliance off turn the mode selector (A) to the "●" position.

Adjusting the thermostat

When the room has reached the required temperature, turn the thermostat slowly the anti-clockwise direction until you hear a click.

The thermostat will then keep room temperature at the selected level automatically.

Frost prevention mode

With the thermostat dial at minimum and the mode selector on "2", the appliance maintains room temperature at about 5°C, preventing freezing with minimal energy consumption.

MAINTENANCE

-Always unplug from the mains socket before cleaning.

-During the season when the appliance is in use, clean the air intake and outlet grilles regularly using a vacuum cleaner.

-Never use abrasive powders or solvents.

CAUTION

-Do not use this heater in the immediate proximity of showers, bathrubs, swimming pools, etc.

-Always use the heater in an upright position.

-Do not use the heater to dry your laundry. Never obstruct the intake and outtake grilles (danger of overheating).

-Do not use the appliance close to walls, furniture, curtains etc.

-If the power cable is damaged, it must be replaced by the manufacturer, an authorized ser- vice center or a qualified electrician in order to eliminate all risk.

-Do not cover the appliance when in operation as this could cause a fire risk.

-Do not use the appliance in rooms less than 4 m2 (43 square feet).

The heater is fitted with a safety thermal cut-off which will switch off the heater in case of acci- dental overheating (eg. obstruction of air intake and outtake grilles, motor turning slowly or not at all). To reset, turn the heater off, disconnect the plug from the outlet for a few minutes, remove the cause of overheating then plug the appliance in again.

Warning: in order to avoid overheating, do not cover the heater.

DCH1030 specifications

The DeLonghi DCH1030 is a compact and efficient ceramic heater designed to provide fast and effective heating for small to medium-sized rooms. This model combines advanced technology with a user-friendly design, making it a popular choice among consumers looking for a reliable heating solution.

One of the standout features of the DCH1030 is its ceramic heating element. Ceramic heaters are known for their ability to warm up quickly, and the DCH1030 is no exception. It achieves rapid heating by generating a steady flow of warm air, making it ideal for immediate comfort during chilly days. The ceramic material also ensures consistent heat output while maximizing energy efficiency, which can lead to lower energy bills.

The DCH1030 is equipped with an adjustable thermostat, allowing users to customize the temperature to their specific needs. This feature not only enhances comfort but also promotes energy savings, as users can set the desired temperature without wasting energy on unnecessary heating.

Safety is a paramount concern when it comes to space heaters, and DeLonghi has incorporated several safety features into the DCH1030. The unit is designed with an overheat protection system that automatically shuts off the heater if it reaches an unsafe temperature. Additionally, the heater includes a tip-over switch that turns off the unit if it is accidentally knocked over, providing extra peace of mind for users.

Another notable characteristic of the DCH1030 is its compact design, making it easy to move from room to room. The lightweight build and convenient carry handle allow for effortless transportation, ensuring that the warmth can be enjoyed wherever needed. The sleek and modern appearance also makes it a stylish addition to any home décor.

The noise level of the DCH1030 is minimal, operating quietly to ensure it does not disturb daily activities or sleep. This makes it particularly suitable for use in bedrooms, offices, or living spaces where a peaceful environment is desired.

In conclusion, the DeLonghi DCH1030 is a versatile and efficient ceramic heater that combines rapid heating capabilities with user-friendly features and robust safety mechanisms. Its adjustable thermostat, compact design, and low noise level make it an excellent choice for those seeking comfort and convenience during the colder months. With innovative technologies and thoughtful design, the DCH1030 stands out as a reliable solution for home heating needs.