Singer 337 manual Stitch Length Adjustment for ZIG-ZAG Satin Stitching

Page 18

16

STITCH LENGTH ADJUSTMENT FOR ZIG-ZAG SATIN STITCHING

SATIN

STITCH

AREA

8

337

STITCH LENGTH LEVER IN SATIN STITCH AREA

Satin stitching, a series of closely spaced zig-zag stitches that form a smooth satin-like surface, is useful for both utility and decorative stitching.

To Adjust Stitch Length for Satin Stitching.

•Move stitch length lever above 20 to satin stitch area.

•Run machine at slow speed.

•Tighten indicator by turning thumb screw to the right, until stitches form a smooth surface.

Make a test sample first before proceeding with the actual work. The Special Purpose presser foot, described on page 26, is recommended for decorative satin stitching, and for making buttonholes.

Image 18

Contents E S I N G F R C O M P a N Y 865 Singer Congratulations Principal Parts of Machine HOW to Wind the Bobbin Tighten stop-motion screw, as shown above To Replace the Bobbin HOW to Thread the Machine ShownLength Chart StitchThis Stitch Controls Loosen thumb nut by turning it to the left1234 Pull end of bobbin thread up through throat plate Pressure Adjustments Ii. i ItiLower number Higher number Needle Thread Tension Straight StitchingBobbin Thread Tension Too loose Stitch Length Adjustment for ZIG-ZAG Satin Stitching Adjustment For ZIG-ZAG Satin StitchingZIG-ZAG Applications Knit Fabric SeamsDarts in Interfacing Mending Application of Elastic. Elastic must beApplique Buttonholes Stitch Length Above Stitch Width 2 Buttonholes Contd Darning Ruffler Straight Stitch PresserSpecial Purpose Foot HOW to Take Care of the Machine When storedTo remove the throat plate To replace the throat plate Positioning Stud Singer Center Page To Oil the Machine Contd Electrical Information To Change Bulb To all whom it may concern Singer