Safety Instructions
1.1
Important Safety Instructions
Important
When using the machine, basic safety procedures must be followed. Read with attention all instructions before using the machine. When using it, understand that all basic safety instructions are not limited to the following items.
Read all instructions, take care of this manual, and use it as reference when necessary.
•Before running the machine, make sure all relevant safety specifica- tions are adequate to specifica- tions and technical standards in your country.
•The machine should not be run without its safety devices.
•The machine should only be oper- ated by properly trained personnel.
•For your safety, goggles must be used while running the machine.
•Turn off or unplug the machine when the following situations arise:
•Passing the thread by the nee- dle or replacing the bobbin or looper.
•Replacing the needle, presser foot, throat plate, feed dog and sliding plate.
•When the machine is in mainte- nance.
•When the operator is not run- ning the machine.
•In case of lubricant oil contact with the eyes or skin, washed the surface with plenty of icy water with a generous amount of cold water. In case of ingestion, seek medical help immediately.
•Repair, fitting or maintenance should only be performed by properly trained personnel.
•Maintenance and repair on elec- tric equipment should only be made by qualified personnel. If any electric device is damaged, the machine should be immedi- ately stopped.
•Before starting the machine in full running, a test must be conducted to assure that machine and opera- tor are able to perform the task.
•The machine should not be placed next to a sound source as an ultra- sonic welding machine and other equipment.
•The machine should only be run with the proper electric cable and connectors, and also the adequate grounding.
•The machine should only be used to sew materials as indicated in its instructions manual, and indi- cations of use should be followed.
Singer will not be held responsible for any damage caused by unau- thorized changes in the product.
Ultra High Speed Overedge and Safety Stitch Machine Instruction Manual and Parts List 1