Oakley O ROKR Pro manual Changing the Lenses, To remove the lenses

Page 11

CHANGING THE LENSES

The lenses of O ROKR Pro can be easily changed. The instructions below show you how to remove the current lenses and install a different set.

WARNING: Follow these instructions carefully. Failure to do so may adversely affect optical performance. Improperly installed lenses may fail to stay in place, causing interference with your vision.

To remove the lenses:

1

2

1.Hold the frame upside down as shown in Figure 1. Grip the lens with one hand. Grip the frame with your other hand by placing your index finger on the nose bridge and your thumb beneath the frame rim.

2.Gently flex the frame by applying upward pressure with your thumb and outward pressure with your index finger. (See Figure 2.) Pull the lens out of the groove.

To install new lenses:

1

2

3

1.Hold the frame upside down as shown in Figure 1. Slide the lens into place so the outer edge tab fits into the frame slot.

2.Rotate the lens into the frame groove until the inner edge tab slides gently into the frame slot.

3.Hold the lens firmly. With your other hand, slide your thumb along the frame edge until the inner lens tab snaps firmly into place.

11

Image 11
Contents 2007.07.30 Rokr PRO ContentsIntroduction To Charge O Rokr PRO Charging the BatteryEasy Pairing O Rokr PRO Pairing with Your Phone AND/OR Music DeviceTurning O Rokr PRO on and OFF Adjusting VolumeMaking and Receiving Calls Using O Rokr PRO for CallsControlling Music Using O Rokr PRO for MusicAudible Indicators Indicator LightLens Tint Transmission Profiles CleaningOakley Frame and Lens Technology To remove the lenses Changing the LensesSafety and General Information Do not Modify or Dismantle BatteryTemperature Recycling Mobile Phones and AccessoriesSpecifications Exclusions and Limitations Service and SupportOakley Limited Warranty International Contact Information Obtaining Warranty ServiceExport LAW Assurances Statement According to FCC PartEuropean Union Directives Conformance Statement FCC Notice to Users