SAFE USE
Use a slow twisting motion to remove the earphones. Never pull on the earphone cord.
Warning: If a sleeve becomes lodged in your ear, seek skilled
medical assistance to remove the sleeve. Damage to the ear may be caused by
Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle.
Turn up the volume control only far enough to hear properly.
Ringing in the ears may indicate that the volume level is too high. Try lowering the volume.
If you connect these earphones to an airplane’s sound system,
listen at low levels so that loud messages from the pilot do not cause discomfort.
Have your ears checked by an audiologist on a regular basis. If
you experience wax buildup, discontinue use until an audiologist has examined your ears.
Stop using the earphones if they are causing great discomfort or infection.
FURNISHED ACCESSORIES
Carrying pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95B2232 Fit Kit w/cleaning tool and replacement sleeves. . . . 90XJ1371
REPLACEMENT PARTS
Bag of 20 foam sleeves | . . . . . . . . . . . . . . . . . | PA750 |
Bag of 500 foam sleeves | . . . . . . . . . . . . . . . . . | PA754 |
Bag of 10 clear flex sleeves | (small) | PA756S |
| (medium) | PA756M |
| (large) | PA756L |
Bag of 10 soft flex sleeves | (small) | PA758S |
| (medium) | PA758M |
| (large) | PA758L |
. . . . . . . . . . . . . . . . . | PA755 |
TECHNICAL SPECIFICATIONS
Transducer type | Low mass/high energy |
Sensitivity (at 1kHz) | 113.5 dB SPL/mW |
Impedance (at 1kHz) | 29 Ω |
Output connector | |
Cable length | 157 cm (62”) |
Net weight | 28 g (0.9 oz) |
CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often find
Ask a Hearing Health Care Professional about creating custom molded sleeves for your earphones. For more information, contact:
Sensaphonics Hearing Conservation | Toll Free: (877) |
660 N. Milwaukee Avenue | In Chicago: (312) |
Chicago, IL 60622 |
|
MAINTENANCE
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.
Do not expose earphones to extreme temperatures.
Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC
Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2) environments.