Singer 14T968DC manual Three-Thread Ultra-Stretch Mock Safety Stitch

3.Thread the top cover thread guide by pulling the thread towards the left until it slips under the guide. Then pull the thread along the right side of the button as illustrated.

6

4. Continue to thread points 4-8. Slip the thread into the rear slot of the

thread guide . Go over the take up lever	. Continue by slipping the
thread into the right slot of the thread guides	and .

5.Before threading the eye of the needle, make sure the thread is behind the thread guide located on the bottom of the needle clamp.

Three-Thread Ultra-Stretch Mock Safety Stitch page 9