Wearing the Earphones, Inserting the Earphones

E2g

Sound Isolating Earphones

Sound isolating gaming earphones with Dynamic MicroDriver technology for full-frequency audio. Lightweight and compact, the E2g is a perfect choice for enhancing portable gaming devices and other audio sources.

©2005, Shure Incorporated	Printed in U.S.A.
27EN3205 (Rev. 1)

WEARING THE EARPHONES

Two popular methods for wearing the earphones are illustrated below.

�

Over the ear

in back

Over the ear in front

Tighten the cable and take up slack by raising the cable sleeve .

INSERTING THE EARPHONES

If the earphone seems to be lacking in low frequency response (bass), check the tightness of the seal between the earphone and your ear, or try one of the other sleeve options.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

left ear	right ear

Make sure that the sleeve completely covers the earphone stem. If any part of the nozzle is exposed, the sleeve is not properly installed.

CHOOSING AN EARPHONE SLEEVE

Your earphones come with a selection of sleeves. Make sure the sleeve you use is easy to insert into your ear, fits comfortably, and is easy to remove from your ear.

Flex Sleeves

In small, medium, and large sizes. Made from translucent

PVC.

Soft Flex Sleeves

In small, medium, and large sizes. Made from pliable rubber.

Foam Sleeves

When using the foam sleeves, compress the sleeve between your fingers before inserting it into the ear canal. Hold the earphone in place for about ten seconds while the foam expands and creates a tight seal.

WAX GUARD

You should place wax guards on the nozzle of your E2g earphones before using them. These protective rings are found on an adhesive strip in the fit kit that comes with your earphones.

To place a wax guard on one of your E2g earphones:

1.Remove the sleeve from the earphone nozzle.

2.If there is a dirty wax guard on the earphone, peel it off.

3.Clean the tip of the E2g nozzle with an antiseptic or alcohol wipe.

4.Make sure that the tip of the nozzle is dry, then remove a wax guard from the supplied strip and place it on the tip of the nozzle, adhesive side down.

5.Replace the sleeve on the earphone.

Wax Guard

Stem

IMPORTANT: Do not place wax guards on sleeves! Wax guards are intended for use on the tip of the earphone nozzle only. If wax guards are placed on sleeves they will not function properly and may fall off the sleeves into your ears.

FULL TWO YEAR WARRANTY

Shure Incorporated (“Shure”) hereby warrants that this product will be free from defects in materials and workmanship for a period of two years from the date of purchase. At its option Shure will repair or replace the defective product and promptly return it to you, or refund the purchase price. You should retain proof of purchase to validate the purchase date and return it with any warranty claim.

If you believe this product is defective within the warranty period, carefully repack the unit, insure it, and return it postage prepaid to:

Shure Incorporated

5800 W. Touhy Ave.

Niles, IL 60714-4608

SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean:

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446 Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

E2g specifications

The Shure E2g is a standout model within Shure's popular line of in-ear monitors, designed especially for musicians and audio professionals who require high-fidelity sound reproduction and above-average comfort. Known for their reliability and sound isolation capabilities, the E2g monitors provide an engaging audio experience in various settings, from stage performances to casual listening.

One of the main features of the Shure E2g is its dynamic micro-driver technology. This advanced driver setup allows for a well-balanced sound profile, rich in bass response while maintaining clarity in the mids and highs. Users can expect a frequency response that ensures their music sounds dynamic and vibrant. Ideal for those who play loud environments, the E2g employs a noise-isolating design that can block out substantial external ambient noise, allowing for an immersive listening experience.

Comfort is another imperative attribute of the E2g, as the earphones come with multiple sizes of silicone ear tips, ensuring a snug fit for extended wear. This ergonomic design not only enhances comfort but also contributes to better sound isolation, further enhancing the listening experience by minimizing sound leakage.

The Shure E2g model is also characterized by its durable construction. Designed to withstand the rigors of touring and live performances, the build quality is robust, with reinforced cables that are less prone to tangling or breaking. This makes the E2g not only a trusted choice for musicians but also for audiophiles seeking longevity in their audio equipment.

In terms of connectivity, the E2g features a detachable cable option, allowing for easy replacements if the original cable becomes damaged. This feature stands out as it extends the lifespan of the product, making it a smart investment for users who might be concerned about wear and tear over time.

Overall, the Shure E2g in-ear monitors encapsulate a blend of excellent sound quality, comfort, and durability. With its noise-isolating design, customizable fit, and dynamic audio performance, the E2g is particularly suited for those who prioritize both performance and quality. Whether you're on stage delivering a powerful performance or just enjoying your favorite playlist, the Shure E2g delivers a captivating and high-quality listening experience that is sure to satisfy even the most discerning audio enthusiasts.