Singer 14T957DC manual Slip the thread into the center slot

Page 33
Slip the thread into the center slot.

Slip the thread into the center slot.

Slip thread through center slot; next slip it in front of the thread guide and then into the eye of the center (D) needle. Finally thread the tail of the thread through the opening in the foot directly below the needle, pull thread under the foot and to the back of the serger.

Image 33
Contents THREADING INFORMATION FOR A 4-THREAD ULTRA STRETCH MOCK SAFETY STITCH TABLE OF CONTENTSTHREADIING INFORMATION FOR A NARROW 5-THREAD SAFETY STITCH HOW TO DISENGAGE THE MOVABLE UPPER KNIFEThreading the Green Upper Looper THREADING INFORMATION FOR A 4-THREAD ULTRA STRETCH MOCK SAFETY STITCHPage Thread Red Lower Looper Threading Blue Overedge Stitch Needle Page Page Threading Orange Overedge Stitch Needle Page THREAD TIPS FOR 4-THREAD ULTRA STRETCH SAFETY STITCH THREADING INFORMATION FOR A NARROW 5 THREAD SAFETY STITCH Page Page Threading Red Lower Looper Page Threading Brown Chain Stitch Looper Page Slip thread through front slot of threading guide Page Threading Blue Overedge Stitch Needle Page Threading Orange Chain Stitch Needle Page THREADING TIPS FOR 5-THREAD SAFETY STITCH Disengage Moveable Upper Knife THREADING INFORMATION FOR A TRIPLE COVER STITCHDisengage the Upper Looper Page Threading The Green Cover Stitch Needle Page Slip the thread into the third slot closest to the take-up lever Threading Blue Cover Stitch Needle Page Slip the thread into the center slot Top Cover Thread Guide Orange Needle Threading Orange Cover Stitch NeedleSlip thread into the first slot and then into the take-up lever slot Slip the thread into the first slot Top Cover Thread Guide Threading Red Lower LooperPage Page Threading Brown Cover Stitch Looper Slip thread through front slot of thread guide Page Page Attaching Cover Stitch Plate TIPS FOR TRIPLE COVER STITCH Disengage Movable Upper Knife HOW TO DISENGAGE THE MOVABLE UPPER KNIFE3-Thread Ultra Stretch Mock Safety Stitch 4-Thread Safety Stitch HOW TO CONVERT THE GREEN UPPER LOOPER TO A SPREADER2-Thread Wrapped Edge Overlock 2-Thread Overedge Looper with spreader activatedHOW TO DISENGAGE UPPER GREEN LOOPER