How to wind the Bobbin

Junior Miss 67B

1.Attach hand crank to hand wheel and turn crank in direction of arrow, until needle is up as far as it will go.

3.Hold bobbin case with open end downward and bobbin will drop out.

4.Place a spool of thread on spool pin. Pull thread through thread guide number 1. Bring about two inches of thread through hole in rim of bobbin from the inside out.

2.Open slide plate and lift bobbin case out of holder.

5.Gently press bobbin winder spring and place bobbin on bobbin winder, with threaded end facing you.

Table of Contents

Previous Page Next Page