Philips AE5250 user manual Listen to DAB radio, Tune to DAB radio, Change DAB station

5Listen to DAB radio

Tune to DAB radio

When you enter the DAB mode for the first time, the radio automatically scans DAB radio stations.Then station list is retained in memory so the next time the radio is switched on, the station scan does not take place.

1 Press DAB/FM repeatedly to select DAB radio.

»»A bar graph indicates the progress of the search and the number of stations found increase as the scan progresses.

	Number of
Progress bar
	Stations found

AWhen scan is completed, the stations are listed in numerical then alphabetic order.

»»First available station is broadcast.

BIf there is no DAB coverage currently available

»»[No DAB Station] is displayed.

AChange the location or adjust antenna.

BPress SELECT to scan again.

Change DAB station

1	Tune to a DAB station.
2	Use / TUNING to navigate through
3	available stations.
	Press SELECT to choose a station.

Scan DAB radio stations

When playing a DAB station, or the current station is not available, press and hold MENU for more than two seconds.

»»The radio scans all available DAB radio stations and broadcasts the current station.

Tip

•• New stations and services will be added in the DAB broadcast. To make new DAB stations and services available on your radio, do scan on a regular base.

Display station information

1	Tune to a DAB radio station.
2	Press SELECT repeatedly to scroll through

the following information (if available): »»Dynamic label segment (DLS)

»»Signal strength »»Program type (PTY) »»Ensemble Name

»»Channel and frequency »»Signal error rate

»»Bit rate and audio status »»Time

»»Date

9EN