Singer 1004 instruction manual Changing the Bulb, Troubleshooting, Maintenance

Page 14

CHANGING THE BULB

Disconnect the machine from the power supply be removing the plug from the main socket. Replace the bulb with the same type rated

1-(1)

LED Φ5MM DC3V 0.6W

+ -

1-(2)

+ -

1.Wipe the machine with clean cloth.

2.Remove bobbin cover and take out the bobbin, place the bobbin cover back after cleaning with a small brush.

3.Keep the machine away from high temperatures. 4.Do not drop.

5.Please turn to the instruction manual when changing the accessories, and make sure these are installed correctly.

Rethread the upper thread and bobbin

Image 14

Contents Why is the thread looping/bunching under my fabric? Why is my machine skipping stitches?Introduction Principal Parts of the Machine Machine Front View Table of ContentsName of Parts Principal Parts and What They do Principal Parts of the Machine Machine Back ViewAccessories Standard AccessoriesRemoving / Installing Extension BED Connecting Machine to Power SourcePresser Foot Lifter Needle / Fabric / Thread GuideInserting / Changing Needles Removing the Presser Foot Removing / Attaching the Presser FootWinding the Bobbin Attaching the Presser FootInserting the Bobbin Threading the Upper ThreadStraight Stitching Threading the Upper Thread Raising the Bobbin ThreadChoosing a Stitch Pattern How Does Tension Work? Thread TensionReverse Sewing / Cutting the Thread Tension TestAppliqué ZIG-ZAG StitchingBlind HEM Stitching Mending a Tear Multi ZIG-ZAG StitchingDarning Plate Elastic InsertionHow to solve common problems Solution TroubleshootingMaintenance Changing the Bulb